DAC SFP+ 10G 5m compatible Cisco SMB/Catalyst

Réf. : 311777

PLANET MGB-TSX Mini GBIC SX Fiber Transceiver Module MM 550m

Réf. : 411799

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard

PLANET MGB-SX2 Multimode SFP Gigabit Fiber Transceiver - 2KM

Réf. : 411798

This hybrid transceiver module uses a long-distance signal over multimode fiber, less expensive than
single-mode. This feature can extend the communication distance to 2 kilometers, compared to the traditional 550-meter limitation.

Product features:

- Duplex fiber optic port with LC connectors
- Gigabit 100LX fiber link over 50/125µm multimode fiber optic cable
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Wavelength: FP 1310 nm
- Frequency: 1.25Gbps
- Power supply: +3.3 V
- Compatible with the MSA (Multi Source Agreement)
- Hot-swappable
- Compliant with SFP standard (Small Form Factor Pluggable 55.5 x 13.5 x 8.5mm)
- Class 1 Laser product, compliant with EN 6025-1 standard

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

PLANET MGB-GT SFP Gigabit Fiber Transceiver

Réf. : 411896

The PLANET MGB-GT fiber transceiver provides an additional copper port.

Product benefits:

- Compliant with an SFP Gigabit slot (3.3V)
- Output signal: 1000Base-T Full Duplex
- RJ-45 UTP category 5/6 cable over 100 meters
- Auto MDI-MDiX function

Caution:

Compatible with SFP Gigabit slots or SFP dual-speed slots, but not compatible with SFP 100FX slots.

No Auto MDI-MDiX on the RJ-45 side: Gigabit operation only, even if the module is set to a dual-speed SFP slot.

SFP 1000SX compatible Cisco SMB Series

Réf. : 311773

SFP 1000SX compatible Cisco Catalyst

Réf. : 311771

DAC SFP+ 10G 3m compatible Cisco SMB/Catalyst

Réf. : 311779