Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 311799

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

FiberTransceiver module Single Mode MiniGBiC 1000 LX -10 km

Réf. : 311795

Bidirectional long-distance fiber module for Ethernet switch equipped with SFP ports.
The digital diagnostic monitoring interface for optical transceivers allows real-time access to
the device's operating parameters.

Product features:

- Duplex Single mode fiber port with LC connectors
- Gigabit link up to a 10-km distance over single mode 9/125µm
- Compliant with the IEEE802.3z Gigabit standard
- Wavelength: PP 1310nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- MSA-compatible
- Hot-swappable
- Digital Diagnostic Monitoring technology
- SFP-compatible (Small Form Factor Pluggable): 55.5 x 13.5 x 8.5mm
- Class 1-compatible Laser product, compliant with the EN 60825-1 standard.

PLANET MGB-GT SFP Gigabit Fiber Transceiver

Réf. : 411896

The PLANET MGB-GT fiber transceiver provides an additional copper port.

Product benefits:

- Compliant with an SFP Gigabit slot (3.3V)
- Output signal: 1000Base-T Full Duplex
- RJ-45 UTP category 5/6 cable over 100 meters
- Auto MDI-MDiX function

Caution:

Compatible with SFP Gigabit slots or SFP dual-speed slots, but not compatible with SFP 100FX slots.

No Auto MDI-MDiX on the RJ-45 side: Gigabit operation only, even if the module is set to a dual-speed SFP slot.

PLANET MGB-SX2 Multimode SFP Gigabit Fiber Transceiver - 2KM

Réf. : 411798

This hybrid transceiver module uses a long-distance signal over multimode fiber, less expensive than
single-mode. This feature can extend the communication distance to 2 kilometers, compared to the traditional 550-meter limitation.

Product features:

- Duplex fiber optic port with LC connectors
- Gigabit 100LX fiber link over 50/125µm multimode fiber optic cable
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Wavelength: FP 1310 nm
- Frequency: 1.25Gbps
- Power supply: +3.3 V
- Compatible with the MSA (Multi Source Agreement)
- Hot-swappable
- Compliant with SFP standard (Small Form Factor Pluggable 55.5 x 13.5 x 8.5mm)
- Class 1 Laser product, compliant with EN 6025-1 standard

PLANET MGB-TLX Mini GBIC LX Transceiver Module SM- 10 km

Réf. : 411795

The extension module is designed for Gigabit Ethernet switches with SFP/Mini-GBiC slots. The module can operate under extreme temperature conditions: -40° to +75°C
The Digital Diagnostic Monitoring function provides real-time information: I/O signal, laser temperature, etc...

Product features :

- Single-mode fiber LC connector
- Gigabit fiber connection up to 10km over single-mode 9/125µm fiber
- Compatible with the following standard : IEEE802.3z Gigabit
- Wavelength : PP 1310nm
- Frequency : 1,25Gbps
- Power supply : +3,3V
- Compatible MSA Multi Source Agreement
- Hot-swappable
- SFP (Small Form factor Pluggable) 55.5 x 13.5 x 8.5mm
- Laser Class 1 compatible with EN 60825-1 directive

The module is particularly resistant to extreme temperature spreads while keeping the performance. Recommended with industrial switches.

PLANET MGB-TSX Mini GBIC SX Fiber Transceiver Module MM 550m

Réf. : 411799

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard

SFP 1000LX Compatible Aruba HP J4859D

Réf. : 311762

SFP 1000LX compatible Cisco Catalyst

Réf. : 311780