PLANET GT-805A Gigabit SFP Media Converter

Réf. : 411805

The PLANET GT-805A is a Gigabit Ethernet converter: 10/100/1000Base-T to 1000Base-SX/LX. It is equipped with 1 x SFP slot for fiber transceiver module insertion and 1 x RJ-45 port with auto negotiation and MDI/MDI-X functions.
The converter supports LFP control (Link Fault Pass-through) so that the administrator will be informed in case of a problem occurring on the link (Link Loss Carry Forward & Link Loss Return).

Specifications:

- 1 x RJ-45 10/100/1000Mbps port
- 1 x SFP slot for fiber module insertion
- Connection distance: 62.5/125µm in multimode fiber up to 220m & 50/125µm in single-mode fiber up to 550m.
- External power supply: 110/230V- 5V/2A
- Compatible with MC1500/MC700 rackmount chassis from PLANET
- Power consumption: 5.6 Watts
- Dimensions: 97 x 70 x 26mm

TP-Link Medienkonverter MC-220L, 1 Gigabit/s, RJ45 an LWL

Réf. : 932MC220L

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410231

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

PLANET GT-802 Gigabit 1000SX Media Converter

Réf. : 411802

Key features:

- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
- TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
- 1000Base-SX: 50/125µm or 62.5/125µm multi-mode fiber cable, up to 220/550m (GT-802).
- Layer 2 key Feature
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminates the loss of packets
- Supports auto MDI/MDI-X function
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
- Media conversion between 10/100/1000Base-T and 1000Base-SX/LX.
- Wallmounting design
- LED indicators for easy network diagnostic
- LFP function available by DIP Switch
- Supports jumbo frames up to 9k
- Compact size, easy installation

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 411815

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410232

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

PLANET XT-705A MEDIA CONVERT. 10G/5G/2.5G/1G/100 - SFP+ 10G

Réf. : 411005

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Réf. : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

PLANET FTP-802 Media Converter FX to TX Multimode 2Km

Réf. : 410802

More than a Fiber Media Converter -- a Power over Ethernet Injector as well
The best data link and power sourcing solution for long reach network equipment
PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
- Media Conversion : 100Base-FX to 10/100Base-TX
- Power over Ethernet : Power Sourcing Equipment(PSE), PoE Injector
Providing both PoE and Fiber Optical interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.

Main features:

- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3af
- Power over Ethernet standards
- Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function
on copper port
- IEEE 802.3x full duplex flow control and back pressure in half duplex eliminates packets loss
- Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
- Auto-detect of PoE IEEE 802.3af equipment and protects devices from being damaged by incorrect installation
- 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802
- 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15
- DIP-switch: LFP (Link Fault Pass-through) mode selection
- Compact in size, easy to install
- LED indicators for easy network diagnostics

Web Manageable Switch 1000Base-TX to 1000Base-SX/LX (SFP)

Réf. : 411915

The PLANET GT-905A Gigabit Ethernet media converter has an embedded Web Smart Controller interface for the control of the data flow, QoS, the bandwidth dispatching and the data transfer speed. The statistic functions of the Web Smart Controller interface provide remote analysis and count the packet flow of the current Ethernet link.
The PLANET GT-905A supports LLR function and Loop Back function, which alarm the administrator prior
to visual inspection.
The SFP fiber connector supports 1000Base-SX multimode and 1000Base-LX single mode Duplex or WDM multiplexed transceivers.
The RJ-45 10/100/1000Mbps copper port supports auto-negotiation and auto MDI/MDI-X functions.
This converter can be used as a stand-alone unit or as a slide-in module to the PLANET MC-700/ MC-
1500 chassis.

Specifications :
- Supports conversion between 10/100/1000Base-TX and 1000Base-SX/LX/BX networks
- Compliant with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX standards.
- Supports auto-negotiation on RJ45 10/100/1000Base-T ports
- The RJ-45 port supports MDI/MDI-X function
- Compact size, fits PLANET MC Media chassis (MC-700 / MC-1500)
- Supports web-based interface for remote management by web browser
- Supports Planet Discovery utility
- Layer 2 management functions
- Supports IEEE 802.3x flow control
- Store-and-Forward architecture
- VLAN802.1Q VLAN tag
- Supports two levels of priority line
- Supports QoS 802.1p
- Supports input/ output bandwidth control
- Supports Broadcast Storm Control
- Supports Ethernet statistic functions on copper and fiber optic interfaces
- Supports LBT and LLR functions
- SNMP trap
- LED indicators for network diagnostic
- RESET button on front panel
- Supports single mode or multimode transceiver on fiber interface
- Power supply : 5V/ 2A (included) / power consumption 5.5W
- Dimensions : 93 x 70 x 26 mm

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311793

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410233

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311760

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

TP-Link media converter MC100CM, 1000 Mbit/s, RJ45 to LWL SC, multimode up to 2 km

Réf. : 932MC100CM

- 1x 100 Mbit / s, 100Base-FX, SC duplex connector
- 1x 100 Mbit / s, RJ45
- Desktop fanless
- With AC adapter