TREND NETWORKS Tone & Probe-II Kit aus Tongenerator und induktivem Empfänger

Réf. : 94600104

PoE TESTER UP TO PoE++

Réf. : 045177

The Gigabit LAN tester is an advanced diagnostic tool. Thanks to this tool, the network administrators can rapidly confirm the status of active port.
It can pin-point the problems during LAN installation or during maintenance for LAN device or wall outlets. The tester indicates the followings:

¦ Auto negociation
¦ 1000 Base-T Full Duplex
¦ 100 Base-T Full Duplex
¦ 100 Base-T Half Duplex
¦ 10 Base-T Full Duplex
¦ 10 Base-T Half Duplex

Features:

¦ Detection of PoE voltage
¦ PSE device Identification and detection of voltage on the pair 1.2-3.6 (Endspan) or on the pair 4.5-7.8 (Midspan)
¦ Transmission rate identification on the port up to Gigabit
¦ 2 x RJ45 connectors (one for Switch/ Hub, the other for Network adapter)
¦ Port Finder function

Fusion splicer with cleaver

Réf. : 395375

Product features :

- Weight: 800g
- Dimensions: 230 x 98 x 53 mm
- Automatic adjustment by V-groove system
- Automatic fusion splicing
- Optical loss, typical: single mode 0.03 dB, multimode 0.01 dB
- 2 preset splicing programs: single mode, multimode
- Includes 2 pairs of fiber holders (250µm-BLACK / 900µm-BLUE) and optional (900µ-RED for loose fiber ; item 395367)
- LC and SC connectors can be spliced directly with the optional SOC holder (item 395369)
- Fusion cycle, typical: 7 s + 50 s (fusion cycle + oven cycle)
- LCD display: 2.8'' TFT colour
- Microscope: x 140
- Embedded splicing oven
- Compatible with protecting sleeves as follows: length 60 mm, diameter 2 to 5 mm
- Multilingual interface
- Embedded rechargeable battery: 7,4 V/2200 mAh. Type Li-Ion
- Communication interface: USB, over mini USB connector
- Memory : Internal : 1 MB, External : SD card
- Power supply : 100-240 V AC / 6 V DC / 1,25 A
- Supported temperature in operation: 0°C~ 45°C
- Supported temperature in storage: -20°~+60°C
- Supported humidity rate in operation: 95% without condensing
- Supported humidity rate in storage : 98% without condensing
- The kit includes : fusion splicer with power adapter and battery, cleaver, stripping tool, 2 pairs
of fiber holders
- User guide
- Replace splicer 395364

Fluke LinkIQ Kabel- und Netzwerktester

Réf. : 92200149

Fluke LinkIQ Kabel- und Netzwerktester Kit mit Zubehör

Réf. : 92200148

850 nm Multimode SFP-module-set for SignalTEK II FO

Réf. : 94600028

- including: 850 nm SFP-modul, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter

1310 nm Singlemode SFP-module-set for SignalTEK II FO

Réf. : 94600029

- including: 1310 nm SFP-module, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter

1550 nm Singlemode SFP-module-set for SignalTEK II FO

Réf. : 94600030

- including: 1550 nm SFP-module, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter