Network Modular Cable Tester RJ45/RJ11

Réf. : 045099

The LAN tester can assist you for the installation and maintenance of your network. The tool is compact and fit for RJ-45, RJ-11 and BNC testing.

Specifications:

- Can test the following connectors and cables: RJ-45/ RJ-11/ RJ-12/ 10Base-T, Token Ring, EIA/ TIA-568, USOC 4/6/8 & Coaxial cables.

- Power supply: 9-V battery (not included)
- RJ-45 to BNC cord included
- In replacement of the PN 045100

PoE TESTER UP TO PoE++

Réf. : 045177

The Gigabit LAN tester is an advanced diagnostic tool. Thanks to this tool, the network administrators can rapidly confirm the status of active port.
It can pin-point the problems during LAN installation or during maintenance for LAN device or wall outlets. The tester indicates the followings:

¦ Auto negociation
¦ 1000 Base-T Full Duplex
¦ 100 Base-T Full Duplex
¦ 100 Base-T Half Duplex
¦ 10 Base-T Full Duplex
¦ 10 Base-T Half Duplex

Features:

¦ Detection of PoE voltage
¦ PSE device Identification and detection of voltage on the pair 1.2-3.6 (Endspan) or on the pair 4.5-7.8 (Midspan)
¦ Transmission rate identification on the port up to Gigabit
¦ 2 x RJ45 connectors (one for Switch/ Hub, the other for Network adapter)
¦ Port Finder function

Fusion splicer with cleaver

Réf. : 395375

Product features :

- Weight: 800g
- Dimensions: 230 x 98 x 53 mm
- Automatic adjustment by V-groove system
- Automatic fusion splicing
- Optical loss, typical: single mode 0.03 dB, multimode 0.01 dB
- 2 preset splicing programs: single mode, multimode
- Includes 2 pairs of fiber holders (250µm-BLACK / 900µm-BLUE) and optional (900µ-RED for loose fiber ; item 395367)
- LC and SC connectors can be spliced directly with the optional SOC holder (item 395369)
- Fusion cycle, typical: 7 s + 50 s (fusion cycle + oven cycle)
- LCD display: 2.8'' TFT colour
- Microscope: x 140
- Embedded splicing oven
- Compatible with protecting sleeves as follows: length 60 mm, diameter 2 to 5 mm
- Multilingual interface
- Embedded rechargeable battery: 7,4 V/2200 mAh. Type Li-Ion
- Communication interface: USB, over mini USB connector
- Memory : Internal : 1 MB, External : SD card
- Power supply : 100-240 V AC / 6 V DC / 1,25 A
- Supported temperature in operation: 0°C~ 45°C
- Supported temperature in storage: -20°~+60°C
- Supported humidity rate in operation: 95% without condensing
- Supported humidity rate in storage : 98% without condensing
- The kit includes : fusion splicer with power adapter and battery, cleaver, stripping tool, 2 pairs
of fiber holders
- User guide
- Replace splicer 395364

Fluke MicroScanner 2 Cable Verifier

Réf. : 92200047

- user-friendly surface: graphic wiremap, length, cable type and distances to fault are displayed on a large screen
- multimedia support: testsall existing media types, including RJ11, RJ45 and coax without adapter
- IntelliTone- tone verification: precisely locates virtually all cables or wire pairs with digital and analog IntelliTone technology
- VDV cable tester: locates the modern media services, among others 10/100/1000 Ethernet, POTS and PoE
- robust housing: integrated rubber holder makes the device handy and resistant to heavy inserts
- large format display: large backlit LC display makes the test results look clear and sharp, both on a sunny weather day and in a dark cabinet
- 1-year warranty

Fluke LinkIQ Kabel- und Netzwerktester Kit mit Zubehör

Réf. : 92200148

Fluke LinkIQ Kabel- und Netzwerktester

Réf. : 92200149

Kurth Classic- Cable Finder Kit KE301

Réf. : 936KE301

- 2 x test Leads (25cm) with alligatorclip
- 1x test line with RJ11 modular plug
- high power output
- cable tracking inside walls
- precise pair identifying
- tone tracking over live lines
- over voltage protection up to 120V
- signal strength LED with noise filter
- torch light build in
- including: Easytest300, Probe310, Solid belt pouch

Kurth DSL tester KE3500 xDSL multi-test

Réf. : 936KE3500

Even the basic features:
- ADSL VDSL2 and Vectoring VDSL2 (ITU-T G.993.5)
- Supports Annex A / B / J / L / M with automatic detection of the DSL service
- GbE port for advanced Ethernet testing
- Dial-up test, ping and traceroute with IPv6 and IPv4
- Modem, router and terminal mode with display of all important parameters
- FTP upload / download, HTTP download test up to 700 Mbit / s
- Extra large, sunlight-readable color TFT with high resolution
- Intuitive operation and large, clear display
- High Performance Li-Po battery and expandable memory
- Including software for managing and creating protocols
- Optional: ISDN / analog, copper tests, VoIP telephony, IPTV testing and real-time analysis

Kurth Cable Finder Kit KE401

Réf. : 936KE401

- 2 x test Leads (25cm) with alligatorclip
- 1x test line with RJ11 and modular plug RJ45
- high power output
- high impendance for ISDN, xDSL, Ethernet
- Sine wave signal for reduced crosstalk
- Data-Port-test and HUB-blink-funktion
- over voltage protected up to 120V
- ISDN/ADSL signal identification
- audible and visually continuity testing
- signal strength LED with noise filter
- torch light build in
- including: Easytest400, Probe410, Solid belt pouch

Kurth electro cable finder kit KE501

Réf. : 936KE501

- high output power
- finds cables also in walls
- input signal to active telephone lines
- overvoltage protection up to 400 V
- alarm LED for voltages > 100 V
- signal LED with noise signal filter
- pocket lamp function
- including: Easytest500, Probe510, rugged protective bag

Kurth Elektro-Leitungssucher-Kit für spannungsführende Leitungen KE601

Réf. : 936KE601

Kurth LAN Kabeltester KE7000 - Gerätepaar

Réf. : 936KE7000

Kurth TelCo- Cable Finder Kit KE701

Réf. : 936KE701

- 2 x test Leads (25cm) with alligatorclip
- 1x test line with RJ11 and modular plug RJ45
- high power output
- high impendance for ISDN,xDSL,Ethernet
- Data-Port-test and HUB-blink-funktion
- ISDN/ADSL signal identification
- over voltage protection up to 400V
- alarm LED for voltage > 85 V
- audible and visually continuity testing
- tone tracking over live lines
- signal strength LED with noise filter
- torch light build in

Kurth 4 Remote-Einheiten KE7010 für LAN Tester KE7200

Réf. : 936KE7010KIT

Kurth LAN Tester KE7200

Réf. : 936KE7200

- graphical display of cable status and error details
- recognition of all wiring errors
- test of RJ45/RJ11/BNC/Koax- cabling possible
- length measuring with the TDR method
- length measuring up to the short circuit
- PoE test following the IEE802.3af standard
- active network test with static IP or DHCP
- listing of the network members with IP and name
- ping test with different frame sizes
- tests the interface on available performance
- device and remote device overvoltage protected up to 200 V AC
- up to 32 remote-units usable
- active remote unit with positiv/negativ LED screen
- saving of the measure details
- included manager software for the data transmission to a PC
- integrated tone send mode for cable- and pair of wires detection
- with optionally available Probe 310
- including: KE7200, 2 remote KE7010, KE-manager software, bag, test wire, manual

Kurth LAN Tester KE7200 PRO Kit

Réf. : 936KE7200P

Kurth LAN tester KE7207

Réf. : 936KE7207

- graphical display of cable status and error details
- recognition of all cabling errors
- verification of RJ45/RJ11/BNC/coax- cablings possible
- length measuring with TDR methode
- measuring of the time until short-circuit and interruption
- PoE test following IEEE802.3af standard
- active network test with static IP or DHCP
- listing of the network members with IP and name
- Ping test with different frame sizes
- verifies the connection on the existing performance
- device and Remote overvoltage protected up to 100 V AC
- up to 32 remote-units usable
- active remote with good/bad status-LED
- saving of the measurements
- included manager software for the data transmission to a PC
- integrated tone send mode for cable and twisted pair detection
- including: KE7100 LAN tester and KE701 Telco line detection kit in a carrying case, incl. test cable and batteries

Kurth Kabeltester Set und Leitungssucher Kit KE7701

Réf. : 936KE7701

Kurth KE801 Fiber&Copper- Cable Finder Kit

Réf. : 936KE801

- 2 x test Leads (25cm) with alligatorclip
- 1x test line with RJ11 and modular plug RJ45
- 1x 2,5 mm Ferrule for SC, ST, DIN, E2000, FC
- high power output
- high impendance for ISDN, xDSL, Ethernet
- over voltage protected up to 400V AC/DC
- audible and visually continuity testing
- universal 2,5mm jack for Fiber test
- build-in Fiber Opitc Fault Locator 650nm with <1mW Power
- signal strength LED with noise filter

Kurth Rotlichtquelle KE850

Réf. : 936KE850

Psiber Toner Probe mit integrierten Tongenerator

Réf. : 938226505

850 nm Multimode SFP-module-set for SignalTEK II FO

Réf. : 94600028

- including: 850 nm SFP-modul, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter

1310 nm Singlemode SFP-module-set for SignalTEK II FO

Réf. : 94600029

- including: 1310 nm SFP-module, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter

1550 nm Singlemode SFP-module-set for SignalTEK II FO

Réf. : 94600030

- including: 1550 nm SFP-module, LC/LC and LC/SC-Duplex-MM-cable, SC/SC-Duplex-adapter

TREND NETWORKS VDV II Kabelverifizierer

Réf. : 94600057