BTR E-DAT Modul Connector Jack, Cat 6a

Réf. : 20820

- RJ45 jack, shielded
- Cat 6 / Class E 12C- de-embedded, tested according to EN 50173-1:2002 and certified by GHMT
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an Draft) up to 100 m
- for installation in modul mounting, connecting sockets or IP 44 surface-flush housing
- can be also applied as a separate socket connecting the installation cable (ideal in the case of lack of space or ground channel)
- no tools needed to connect through IDS (insulation displacement connector)
- modul housing made of zinc diecasting

Dätwyler unilan modular connection sockets, Cat 6A

Réf. : 303418060

- RJ45 jack, shielded
- Cat.6A componentcheck following TIA/EIA 568-B.2-10:2008
- compliance with the class EA according to ISO/IEC 11801:2002 / Amd.1:2008
- specified up to 500 MHz
- for 10 Gigabit/s Ethernet (IEEE 802.3an) up to 100 m
- for installation in the module mounting or data jack
- fitting for standard Keystone cut-outs
- also usuable as individual socket for connection with patch and installation cables (ideal for limited space or for use in floor channels)
- toolless connection due to insulation displacement connectors
- reusable modular zinc diecasting case

BTR Data Outlet E-DAT module, Cat 6a, 2-port, surface-mount, pure white RAL 9010

Réf. : 20822A

- 2x RJ45 jack, shielded, 45° angled, with dust protection cover
- Cat 6 / Class E 12C-de embedded in compliance with EN 50173:2002 and certified by GHMT
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3 an Draft) up to 100m
- modular structure, full-shielded individual modules
- no tools needed for connection through IDC (insulation displayment connector)
- cable feeding possible from all sides (360°)
- subsequent extension possible at any time
- with viewing windows for port identification

Metz Connect E-DAT Keystone Anschlussbuchse, Cat.6A

Réf. : 130910

BTR C6Amodul Connecting Socket, Cat 6A, 180°

Réf. : 16000185

- RJ45 socket, shielded
- cable feed 180°
- Cat.6A certified according to ISO/IEC 11801 Ed.2.2 (FPDAM), TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHM-certified
- Class EA according to ISO/IEC 11801 Ed.2.2 (FPDAM)
- components tested up to 600 MHz, link tested up to 800 MHz
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an) up to 100 m
- also applicable as a single socket for connection to patch and installation cables (perfect for space-limited places and in the floor duct)
- toolless connection with IDC clamps
- reusable module housing of die-cast zinc

BTR E-DAT Modul Coupler, Cat 6

Réf. : 16000061

- RJ45 jack to RJ45 jack, shielded
- Cat 6 / Class E 12C- de-embedded, tested according to EN 50173-1:2002 and certified by GHMT
- qualified for 10 Gigabit/s Ethernet (IEEE 802.3an Draft) up to 100 m
- for installation in modul mounting, or in IP 44 surface-mount housing
- suitable for connecting 2 patch cables
- modul housing of zinc diecasting

BTR Data outlet E-DAT C6, Cat 6, 2-port, flush mount, pure white RAL 9010

Réf. : 16000030

- 2x RJ45 jack, shielded, 45°angled, with dust protection cover
- Cat 6 / Class E 12C-de embedded in compliance with EN 50173-1:2002 norms, certified by GHMT
- LSA Plus connection
- cable feeding from 8 sides possible (45°)
- potential equalisation can take place over 6,3 mm cable shoe
- mounting possible in 58-mm flush-mounting outlet sockets
- installation depth 31,5 mm
- central plate 50 x 50 mm, a renown switch manufacturer is responsible for design covers
- flush-mounting frames 80 x 80 mm
- with viewing windows for port identification

Telegaertner AMJ-S module Cat.6A (ISO / IEC), 2 pcs

Réf. : 14000008

- RJ45 connector, shielded
- GHMT certified
- Category 6A according to IEC 60603-7-51
- Category 6A re-embedded tested in accordance with IEC 60512-27-100
- Class EA according to ISO / IEC 11801
- 10 Gigabit / s Ethernet (IEEE 802.3an) to 100 m
- For installation in the module rack or data outlet
- Suitable for standard keystone openings

BTR Data Outlet E-DAT module, Cat 6a, 2-port, flush-mount, pure white RAL 9010

Réf. : 20822U

- 2x RJ45 jack, shielded, 45° angled, with dust protection cover
- Cat 6 / Class E 12C-de embedded in compliance with EN 50173:2002 and certified by GHMT
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3 an Draft) up to 100m
- modular structure, full-shielded individual modules
- no tools needed to connection through IDC (insulation displayment connector)
- cable feeding possible from all sides (360°)
- installation depth 33 mm
- cetral plate 50 x 50 mm, suitable for design covers of famous switch manufacturers
- flush-mounting frames 80 x 80 mm
- subsequent extension possible at any time
- with viewing windows for port identification

BTR REG Module Mounting for 1 E-DAT module connector jack

Réf. : 16000120

- for mounting on the rail, mounting width 1 HP (18 mm)
- for mounting of E-DAT module connector jacks 20820, 16000061, 16000062, 16000063
- viewing windows with port identification
- with dust protection cover

BTR data outlet E-DAT C6A, Cat.6A (ISO), 2-way, wall-mounted, pure white RAL 9010

Réf. : 16000207

- 2x RJ45 socket, shielded, inclined by 45°, with dust-protected covers
- cable feed inclined by 270° downwards
- class EA tested up to 500 MHz components certified according to ISO/IEC 11801 Ed.2.2 (2010), TIA/EIA-568-C.2 (2009-08) und IEC 60603-7-51 Ed.1 (12/2008), GHM-certified
- Class EA according to ISO/IEC 11801 Ed.2.2 (2010)
- components tested up to 600 MHz, link tested up to 800 MHz
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an) up to 100 m
- Alien Next optimized, shielded single socket
- HF-technically optimized and ergonomical formed IDC clamps (installation by the the front)
- suitable for Power over Ethernet (PoE and PoE plus)
- central plate 50 x 50 mm, suitable for design covers of renowned switch manufacturers
- flush-mount frames 80 x 80 mm
- with viewing panels for identification

Telegärtner AMJ-SL Modul Cat.6A T568A VE: 2 Stück

Réf. : 14000055

Metz Connect 25GBASE-T E-DAT modul Anschlussbuchse, Cat.6A

Réf. : 130B1125

BTR E-DAT Industry IP67 Data Outlet, Cat 6, light grey RAL 7035

Réf. : 16000003

- RJ45 jack, shielded
- Cat 6 / Class E Link Performance according to ISO/IEC11801 (9/2002) and EN50173 (1/2002)
- IP 67 rating in mated condition
- environment class I3, C3, M3, E3 according to EN50173-2 (project)
- IP67- captive cover
- large-sized 360° shield connectivity
- surface mounting in rows possible
- easy to open, re-usable modules
- accepts commercially available RJ45 plug (no IP protection)

Telegaertner rail connector TS45 including AMJ-S Module Cat 6A ISO / IEC, light gray

Réf. : 14000014

BTR E-DAT Modul REG Connector Jack , Cat 6a

Réf. : 16000011

- RJ45 jack, shielded with dust protection cover
- Cat 6 / Class E 12C-de-embedded, tested according to EN 50173-1:2002 and certified by GHMT
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an Draft) up to 100 m
- for mounting on the rail, mounting width 1 HP (18 mm)
- no tools needed for connection through IDC (insulation displacement connector)
- module housing made of die-cast zinc
- isolation class I or II, depending on the installation type
- viewing windows with port identification

BTR Data Outlet E-DAT module, Cat 6a, 1-port, surface mount, pure white, RAL 9010

Réf. : 20821A

- 1x RJ45 jack, shielded, 45° angled, with dust protection cover
- Cat 6 / Class E 12C-de embedded in compliance with EN 50173:2002 and certified by GHMT
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3 an Draft) up to 100m
- modular structure, full-shielded individual modules
- no tools needed for connection through IDC (insulation displayment connector)
- cable feeding possible from all sides (360°)
- subsequent extension possible at any time
- with viewing windows for port identification

Surface mount for flush-mounted cases, openings for cable entry, perl white RAL 1013

Réf. : 17000460

- for the installation of different flush-mounted cases
- 6 lateral openings for cable entry as well as 1 opening at the back
- dimensions (W x H x D): 80 x 80 x 40 mm

BTR Data Outlet C6Amodul, Cat 6A, 270°, 2-port, Flush-Mount, pure white RAL 9010

Réf. : 16000193

- 2x RJ45 socket, shielded, inclined by 45°, with dust-protected covers
- cable feed inclined by 270° downwards
- Cat.6A components certified according to ISO/IEC 11801 Ed.2.2 (FPDAM), TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHM-certified
- Class EA according to ISO/IEC 11801 Ed.2.2 (FPDAM)
- components tested up to 600 MHz, link tested up to 800 MHz
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an) up to 100 m
- modular design, fully shielded module
- toolless connection with IDC clamps
- reusable module housing made of die-cast zinc
- central plate 50 x 50 mm, suitable for design covers of renowned switch manufacturers
- flush-mount frames 80 x 80 mm
- with viewing panels for identification
- extension possible at any time

PureLink Pure Install Series HDMI outlet, 2-fold, white

Réf. : 258PI105

- High Speed ??HDMI for 3D and HDTV resolutions up to 4k (2160p)
- Space-saving, clean and easy transmission of HDMI signals
- Interfering wires!
- Especially for professional applications and installations
- External connection: 2x HDMI socket A
- Connection inside: 2x Connecting cable 0.1 m with HDMI socket A

BTR data outlet E-DAT C6A, Cat.6A (ISO), 2-way, flush-mounted, pure white RAL 9010

Réf. : 16000210

- compact design, for the installation in standard flush-mounted data outlets
- 2x RJ45 socket, shielded, inclined by 45°, with dust-protected covers
- class EA tested up to 500 MHz components certified according to ISO/IEC 11801 Ed.2.2 (2010), TIA/EIA-568-C.2 (2009-08) und IEC 60603-7-51 Ed.1 (12/2008), GHM-certified
- Class EA according to ISO/IEC 11801 Ed.2.2 (2010)
- components tested up to 600 MHz, link tested up to 800 MHz
- suitable for 10 Gigabit/s Ethernet (IEEE 802.3an) up to 100 m
- Alien Next optimized, shielded single socket
- HF-technically optimized and ergonomical formed IDC clamps (installation by the the front)
- suitable for Power over Ethernet (PoE and PoE plus)
- central plate 50 x 50 mm, suitable for design covers of renowned switch manufacturers
- flush-mount frames 80 x 80 mm
- with viewing panels for identification

Telegaertner Data-Outlet AMJ-S flex, Cat 6A (ISO / IEC), 2-way

Réf. : 14000006

- Modular design, fully shielded individual modules in Keystone format
- 2x RJ45 connector, shielded, angled 45 °
- GHMT certified
- Category 6A according to IEC 60603-7-51
- Category 6A re-embedded tested in accordance with IEC 60512-27-100
- Class EA according to ISO / IEC 11801
- 10 Gigabit / s Ethernet (IEEE 802.3an) to 100 m
- Suitable for design covers all well known manufacturers

Rutenbeck Central plate for data outlets, 3-port, pearl white RAL 1013

Réf. : 16100030

- for mounting channel outlet 16100028
- dimensions: 50 x 50 mm
- fits the standard frames for telephone outlet of various switch manufacturers

Rutenbeck REG-Montageadapter für Keystone-Module KMK, 1-fach

Réf. : 16100108

Flush Mounting Plate, pearl white

Réf. : 20300R

- for flush-mount sockets 20322, 20332, 20013, 20014 und 20342
- dimensions: 80 x 80 mm