PLANET IGS-4215-4P4T Industrial Switch 8 Giga Ports 4 PoE+

Réf. : 314846

The PLANET IGS-4215 4P4T2S is a layer 2 industrial switch with 8 Ethernet Gigabit ports including 4 PoE+ ports. In addition, the 2 dual-speed SFP ports provide fiber optic connection.
The switch can supply 30 W per port. In addition, two dual-speed SFP ports are available for fiber optic connection. The switch supports the usual layer 2 functions, including VLAN, IGMP, and Spanning Tree, as well as a smart PoE management function. If after 3 attempts, there is no answer, the switch automatically reboots the device and sends an E-mail notification to the network administrator. There is no need to send a technician to reboot the switch.
The programming schedule disconnects the power supply of idle devices connected to the switch. It is
easier to disable Wi-Fi hot-spots or telephones during the night, while keeping active the CCTV system.

IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Réf. : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

PLANET IGS-510TF Switch Indust. 4p Gigabit & 1 SFP 100/1G

Réf. : 314841

Industrial 8-Port PoE+ Wall-mounted Gigabit switch

Réf. : 314818

Industrial 8-Port Wall-mounted Gigabit switch W/4 PoE+

Réf. : 314814

Industrial 8-Port Wall-mounted Gigabit switch

Réf. : 314811

PLANET IGS-801T Industrial Gigabit Switch- 8 Ports

Réf. : 314808

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314805

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

PLANET Industrial Switch 10/100- 8 Ports

Réf. : 314708

PLANET ISW-801T switch
8 x 10/100Mbps industrial switch. It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 8 x 10/100Mbps ports
- Backplane: 1.6Gbps
- Can be powered by 6-pin terminal block (redundant with alarm)
- Voltage: 12 - 48V DC
- Power: 11,6 Watts
- IP30-rated aluminum housing
- Operation temperature : -40°C to +75°C
- Installation : by 35-DIN rail / fixing plate
- Dimensions: 135x87x32mm - 454g


It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 4 x 100Mbps Auto-MDiX RJ-45 ports
- 2 x 100FX Duplex SC fiber ports
- Fiber signal : 100FX 1310nm
- Operation : Multimode 50/125µm / 62.5/125µm (2km max)
- Twisted pair transmission over RJ45 ports : 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber transmission : 200Mbps in Full-Duplex
- IP30-rated
- Operation temperature : -40° to +75°
- Humididy supported: 5 to 90%
- 2 fixing kits included: Wallmount installation or 35-mm DIN rail installation
- Can be powered by terminal block: 2 x 12 - 48V inputs/ alarm output
- Protection : Ethernet 6KV DC / Alimentation 6KV DC / Reversed polarity
- Power consumption : 16 watts max
- Dimensions : 135 x 97 x 32 mm - 438g

PLANET Industrial Switch- 4 x 10/100 + 2 x 100FX SC MM- 2 km

Réf. : 314706

This fiber media converter has 2 fiber ports and a 4-port embedded copper switch.
You can expand your network by cascading the converters up to 2 km.

The heavy-duty design makes this converter ideal for rough environments. It supports
extreme temperatures.

Product features:

- 4 x 100Mbps RJ-45 auto-MDIx ports
- 2 x 100FX duplex SC fiber ports
- Fiber optic signal: 100FX 1310nm
- Compatible with Multimode 50/125µm / 62.5/125µm (2km max) fiber
- RJ-45 copper transmission: 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber optics transmission: 200Mbps in Full-Duplex
- Protection index: IP30
- Supported temperature ranges: -40° to +75° / 5 à 90% humidity rate
- Two installation modes: DIN rail or wall-mounted
- Power supply: 2 x 48V with alarm output
- Protection: Ethernet 6KV DC / Power supply 6KV DC / Reversed polarity
- Dimensions : 135 x 97 x 32 mm - 442gr

PLANET Industrial Switch 10/100- 5 Ports

Réf. : 314705

PLANET ISW-501T switch
5-port industrial network switch, 10/100Mbps. Can be installed in a warehouse, manufacture, or any production site or even outdoors.
It is a very sturdy device with a waterproof housing (IP30). Can operate in extreme temperatures.
Compliant with Class I division II

Specifications:

- 5 x 10/100Mbps ports
- Backplane: 1Gbps
- Powered by 6-pin terminal block with dual input (redundant with alarm)
- Voltage: 12 to 48V DC
- Power : 11 Watts
- Aluminum housing (IP30)
- Operation temperature: -40°C to +75°C
- Installation : DIN rail 35/ fixing plate
- Dimensions: 135x87x32mm - 438g

PLANET IP30 Outdoor PoE Splitter 12/24V -40/75°

Réf. : 314702

Industrial IEEE802.3at Gigabit High Power over Ethernet Splitter

- IP-30 metal case protection
- Din Rail and Wallmount design
- Supports 6000VDC EFT protection on the power line
- Supports 6000 VDC Ethernet ESD protection
- Complies with IEEE802.3at PoE powered devices
- Splits the 48~56 V DC power over RJ-45 Ethernet cable into DC 12V/24V output
- Auto detection of PoE IEEE802.3at equipment protects devices from being damaged by incorrect installation
- Adjustable output voltage options (12V/ 2A, 24V/ 1A) to fit various devices
- 2-Port RJ-45 interfaces:
1-port PoE Power + Data input
1-port Data output
- 2 DC out (4-pin terminal block)

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314515

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

Planet ISW-500T switch indust. 5P 10/100 compact -40/+75°

Réf. : 314505

Industrial 802.3at (30W) high power poe injector

Réf. : 314162

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311793

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311760

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

PoE TESTER UP TO PoE++

Réf. : 045177

The Gigabit LAN tester is an advanced diagnostic tool. Thanks to this tool, the network administrators can rapidly confirm the status of active port.
It can pin-point the problems during LAN installation or during maintenance for LAN device or wall outlets. The tester indicates the followings:

¦ Auto negociation
¦ 1000 Base-T Full Duplex
¦ 100 Base-T Full Duplex
¦ 100 Base-T Half Duplex
¦ 10 Base-T Full Duplex
¦ 10 Base-T Half Duplex

Features:

¦ Detection of PoE voltage
¦ PSE device Identification and detection of voltage on the pair 1.2-3.6 (Endspan) or on the pair 4.5-7.8 (Midspan)
¦ Transmission rate identification on the port up to Gigabit
¦ 2 x RJ45 connectors (one for Switch/ Hub, the other for Network adapter)
¦ Port Finder function