1-Port 30W poe+ to 2-Port 802.3af/at gigabit poe

Part/number : 410202

1-Port 60W ultra poe++ to 4-Port 802.3af/at gigabit poe+

Part/number : 410304

Industrial 8-Port PoE+ Wall-mounted Gigabit switch

Part/number : 314818

Industrial 8-Port Wall-mounted Gigabit switch

Part/number : 314811

Industrial 8-Port Wall-mounted Gigabit switch W/4 PoE+

Part/number : 314814

Industrial 802.3at (30W) high power poe injector

Part/number : 314162

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Part/number : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Part/number : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

Planet FGSD-1022VHP 16P PoE+Switch 300W LCD screen +2G +2SFP

Part/number : 411822

The PLANET FGSW-1822VHP is a PoE+ switch equipped with 16 RJ-45 PoE+ ports and 2 Gigabit combo ports.
The 8 PoE+ ports supply the power to PoE 802.3af/at-compliant devices.
The 2 RJ-45 Gigabit ports are combo ports, meaning they can be operated either with a copper connection or with a fiber connection. You can insert SFP modules and build up a long-distance connection (NVR, Internet access)
The FGSW-1822VHP has a 300 W PoE power output budget and the LCD screen can give you real-time information on the status of each connected device.
The switch is well adapted to small CCTV installations, for example a combination of indoor cameras with or without day/night vision or PTZ outdoor cameras with heated housings, which demand more resources.
Aside from the PoE+ functions, the PLANET FGSW-1822VHP has a micro switch. You can select the ''VLAN mode'' and isolate each port of the connected cameras, to improve the image flows transferred to the recorders, or select the ''Extended mode'', if you need to build up an up to 250-m connection over copper Ethernet cable. For this latter mode, we recommend that you use solid-wire category 6 cable with RJ-45 field connectors.

Product benefits:

- 16 x 10/100 PoE+ 802.3af/at ports supplying each 30.8W
- 2 x 10/100/1000 SFP/copper combo ports
- Total PoE budget: 300 W
- LCD screen providing the status of each PoE+ port including the power consumption and remaining power.
- Two operating modes: VLAN and Extended
VLAN mode: isolation of each port for better security and flow quality
Extended mode: long-distance connection up to 250 m

Planet FGSD-1022VHP 8P PoE+Switch 120W+ LCD screen +2G +2SFP

Part/number : 411022

The PLANET FGSD-1022VHP is a PoE+ switch equipped with 8 RJ-45 PoE+ ports and 2 Gigabit combo ports.
The 8 PoE+ ports supply the power to PoE 802.3af/at-compliant devices.
The 2 RJ-45 Gigabit ports are combo ports, meaning they can be operated either with a copper connection or with a fiber connection. You can insert SFP modules and build up a long-distance connection (NVR, Internet access)
The FGSD-1022VHP has a 120W PoE power output budget and the LCD screen can give you real-time information on the status of each connected device.
The switch is well adapted to small CCTV installations, for example a combination of indoor cameras with or without day/night vision or PTZ outdoor cameras with heated housings, which demand more resources.
Aside from the PoE+ functions, the PLANET FGSD-1022VHP has a micro switch. You can select the ''VLAN mode'' and isolate each port of the connected cameras, to improve the image flows transferred to the recorders, or select the ''Extended mode'', if you need to build up an up to 250-m connection over copper Ethernet cable. For this latter mode, we recommend that you use solid-wire category 6 cable with RJ-45 field connectors.

Product benefits:

- 8 x 10/100 PoE+ 802.3af/at ports supplying each 30.8W
- 2 x 10/100/1000 SFP/copper combo ports
- Total PoE budget: 120 W
- LCD screen providing the status of each PoE+ port including the power consumption and remaining power.
- Two operating modes: VLAN and Extended
VLAN mode: isolation of each port for better security and flow quality
Extended mode: long-distance connection up to 250 m

Planet FGSW-2622VHP 24P PoE+Switch 300W LCD + 2G +2SFP combo

Part/number : 412622

The PLANET FGSW-2622VHP is a PoE+ switch equipped with 24 RJ-45 PoE+ ports and 2 Gigabit combo ports.
The 24 PoE+ ports supply the power to PoE 802.3af/at-compliant devices.
The 2 RJ-45 Gigabit ports are combo ports, meaning they can be operated either with a copper connection or with a fiber connection. You can insert SFP modules and build up a long-distance connection (NVR, Internet access)
The FGSW-2622VHP has a 300 W PoE power output budget and the LCD screen can give you real-time information on the status of each connected device.
The switch is well adapted to small CCTV installations, for example a combination of indoor cameras with or without day/night vision or PTZ outdoor cameras with heated housings, which demand more resources.
Aside from the PoE+ functions, the PLANET FGSW-2622VHP has a micro switch. You can select the ''VLAN mode'' and isolate each port of the connected cameras, to improve the image flows transferred to the recorders, or select the ''Extended mode'', if you need to build up an up to 250-m connection over copper Ethernet cable. For this latter mode, we recommend that you use solid-wire category 6 cable with RJ-45 field connectors.

Product benefits:

- 24 x 10/100 PoE+ 802.3af/at ports supplying each 30.8W
- 2 x 10/100/1000 SFP/copper combo ports
- Total PoE budget: 300 W
- LCD screen providing the status of each PoE+ port including the power consumption and remaining power.
- Two operating modes: VLAN and Extended

VLAN mode: isolation of each port for better security and flow quality
Extended mode: long-distance connection up to 250 m

PLANET FNSW 1600P PoE Switch with 16 x 10/100 Ports 125W

Part/number : 411602

The PLANET FNSW-1600P is a 16-port 10/100Mbps PoE Fast Ethernet Switch. It will power up to 16 x 802.3af PoE devices over RJ-45 cable. .
The switch transfers data and power through the same media.

Specifications:

- 16 x RJ45 10/100Mbps Auto-MDiX PoE Ports compliant with IEEE 802.3af/ Midspan standards (pin 4/5/7/8)
- Power output: 48V - 15,4W - 350mA
- Maximum output power delivered to the PD: 15,4W
- Maximum total power: 125W
- Rackmount: 19'' 1U
- Dimensions : 445 x 45 x 207 - 2.33kg
- Internal power supply: 100/240V 2A

PLANET FNSW 1600P PoE Switch with 16 x 10/100 Ports 125W

Part/number : 411621

The PLANET FNSW-1600P is a 16-port 10/100Mbps PoE Fast Ethernet Switch. It will power up to 16 x 802.3af PoE devices over RJ-45 cable. .
The switch transfers data and power through the same media.

Specifications:

- 16 x RJ45 10/100Mbps Auto-MDiX PoE Ports compliant with IEEE 802.3af/ Midspan standards (pin 4/5/7/8)
- Power output: 48V - 15,4W - 350mA
- Maximum output power delivered to the PD: 15,4W
- Maximum total power: 125W
- Rackmount: 19'' 1U
- Dimensions : 445 x 45 x 207 - 2.33kg
- Internal power supply: 100/240V 2A

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Part/number : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

PLANET FTP-802 Media Converter FX to TX Multimode 2Km

Part/number : 410802

More than a Fiber Media Converter -- a Power over Ethernet Injector as well
The best data link and power sourcing solution for long reach network equipment
PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
- Media Conversion : 100Base-FX to 10/100Base-TX
- Power over Ethernet : Power Sourcing Equipment(PSE), PoE Injector
Providing both PoE and Fiber Optical interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.

Main features:

- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3af
- Power over Ethernet standards
- Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function
on copper port
- IEEE 802.3x full duplex flow control and back pressure in half duplex eliminates packets loss
- Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
- Auto-detect of PoE IEEE 802.3af equipment and protects devices from being damaged by incorrect installation
- 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802
- 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15
- DIP-switch: LFP (Link Fault Pass-through) mode selection
- Compact in size, easy to install
- LED indicators for easy network diagnostics

Planet Gigabit Switch MGS-910X, 8 Port 2500 Mbps, 1 Uplinkport 10 Gbps, 19" / 1 HE

Part/number : 411911

Planet Gigabit Switch MGS-910XP, 8 Port 2500 Mbps PoE+, 1 Uplinkport 10 Gbps, 19" / 1 HE

Part/number : 411910

PLANET GS-4210 PoE+ Gigabit Ethernet Switch 300W 24 P+2SFP

Part/number : 414210

The PLANET GS-4210 PoE+ Gigabit Ethernet switch is a cost-effective professional device designed for
IP telephone, video surveillance and Wi-Fi hot-spot applications.

The switch has a 300-W power budget and can supply the power to powered devices (PD) over category 5
cable (and over). Thanks to this feature, you don+t need to install additional wall power outlets next to your connected devices. In this way, the PLANET GS-4210 is ideal to upscale your network infrastructure.

The switch has a wide range of management functions to optimise VoIP flows separately, without affecting the data flows in your office.

The PLANET GS-4210 supports 2 dual-speed ports for fiber optic transceivers, which allow a rapid connection to other devices equipped with 100FX or Gigabit 1000SX/LX connectors.

Product benefits:

- 24 x PoE+ 30-W Gigabit ports and 2 x dual-speed fiber ports (100FX/1G
- 1 x RS-232 serial management port with RJ-45 connector
- Compatible with PoE802.3af/at
- Backplane: 52Gbps with 4.1Mbps shared buffer
- Total PoE budget: 300 W allowing the switch to supply the power to the following devices:
24 x 7-W devices (ex: IP telephones)
19 X 15.4-W devices (ex : IP cameras or Wi-Fi N300 hot-spots)
9 x 30-W devices (ex : PTZ cameras, Wi-Fi N/AC Dual-band hot-spots

Planet GS-4210-8P2S Gigabit Switch PoE+120W & 2 sfp 100FX/1G

Part/number : 414208

The PLANET GS-4210-8P2S managed switch has 8 Gigabit RJ-45 ports with PoE+ function, supplying up to
36W per port, and 2 SFP optical ports capable of building up 100FX / Gigabit long-distance connections, depending on the SFP module.
In addition to layer 2 management functions, the PoE+ switch supports the Watchdog function, so that
the connected devices can be tested and automatically reset, in case of a failure or if they don+t acknowledge the ping request sent by the switch.
Thanks to this implementation, there is no need to send a technician on the field to switch on/off a
camera or reboot a disabled Wi-Fi hot-spot.
The PLANET GS-4210-8P2S switch supports a scheduling program to manage the PoE budget. For example, you can power off IP and Wi-Fi hot-spots during the night to increase the security of your data, while saving more resources for the CCTV system.

Product benefits:

- High-power PoE+ ports: 36W
- Layer 2 functions: VLAN, QoS, IGMP...
- Watchdog
- Embedded scheduling program
- 2 x Dual Speed fiber optic ports compatible with most 100FX/ Gigabit SFP modules

Planet GSD-1002M sw Niv2 8 gigabit + 2 sfp 100/1G poe pd

Part/number : 411001

The PLANET GSD-1002M is a layer 2 managed switch with 8 Gigabit ports, including one PoE+ port for the connection to a PSE device.
Thus, there is no need to connect the switch to a power outlet, which can facilitate the installation.
The PoE # 8 port can also be used to connect an external power supply, and operate as a redundant power supply. In case of a failure, the switch can still operate, over PoE link.
Moreover, the PLANET GSD-10002M switch is equipped with 2 SFP slots, compatible with 100FX or Gigabit fiber optics modules.

Product benefits:

- Layer 2 management functions: IGMP, VLAN, Spanning Tree, QoS
- Dual power supply capability: power adapter or PoE+ # 8 port
- Embedded fiber optics converter: 2 x SFP slots

Planet GSD-1002VHP sw 10P gigabit with 8P poe+ & lcd screen

Part/number : 410222

The PLANET GSD-1002VHP is a Gigabit Switch with 10 ports, including 8 PoE+ ports, which supply the power and the data over a single Ethernet cable, to PoE 802.3af/at-compliant devices.
The 2 non-PoE ports can build up a link to a NVR or Internet access.

In addition, the PoE+ PLANET GSD-1002VHP switch can supply up to 120W total PoE budget and is equipped with an LCD screen providing information on each PoE-compliant connected device.
You+ll be informed in real-time about the available power resource.
The switch was designed for small CCTV installations, including combinations of indoor/outdoor cameras, day/night vision and outdoor cameras as well.

The PLANET GSD-1002VHP supports two operating modes: VLAN isolation, where each port is isolated from another, and EXTENDED, where you can build up copper links up to 250m. For the latter, please use solid-wire category 6 cable and over, with RJ-45 field connectors.

Product features:

- 10 x 10/100/1000 RJ-45 ports including 8 PoE+
- Total PoE budget: 120 W
- LCD screen indicating the power consumption of each connected device and the available PoE resource on each port
- Supports VLAN isolation mode: each camera is isolated from the other ones, providing data protection and smoother video flows
- Supports EXTENDED mode: installation of IP cameras at up to 250 meters from the switch

Planet GSD-1008HP switch 10" 10P gigabit with 8 poe+ 120W &

Part/number : 411408

PLANET GSD-2022P Switch 18P Giga W/16 PoE++ 95W & 2 SFP

Part/number : 412222

Planet GSD-604HP switch 6P gigabit with 4 poe+ 55W

Part/number : 411604

The PLANET GSD-604HP is a 6-port Gigabit switch, with a compact metal housing. The switch supports 4
PoE+ ports.
The PLANET GSD-604HP was designed to build-up small installations including video surveillance cameras and wireless access points. The PoE+ function makes it easy to implement, since data and power are transmitter over a single twisted-pair cable. The switch can supply the power to 4 x IEEE802.3af/at-compliant devices.
In addition, the switch supports VLAN mode, which isolates each device from another, thus ensuring a
higher connection quality.

Product benefits:

- 4 x 10/100/1000Mbps PoE+ ports supplying 30W each
- 1 x 10/100/1000Mbps port for NVR connection
- 1 x Uplink port for Internet connection
- VLAN mode (with micro switch) ensuring a higher quality and reliability of the connections
- Compact size, metal housing
- Fanless design, silent operation

PLANET GSD-908HP Gigabit PoE Switch 120W-8 Ports+ NVR Giga

Part/number : 411908

The GSD-908HP is equipped with 8 x 10/100/1000Mbps 802.3at/af PoE+ ports and 1 Gigabit port, for a total budget of 120 Watts.
The 8 IEEE802.3at PoE+ ports supply the power to IEEE802.3at/af - compliant devices.
It is the ideal solution for video surveillance SOHO installations. The Gigabit Uplink port is dedicated to NVR connection for local data storage and backup.
The GSD-908HP has a metal housing, suitable for domestic and professional environments. The switch has magnetic pads, an easy way to fix it on a metallic vertical surface.
The anchor is handy if you want to protect your device with a locking system.

Specifications:

- Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX, IEEE 802.3ab, 1000Base-T standards
- 9 x 10/100/1000Mbps Gigabit Ethernet ports
- 8 Ports supply 51V DC power to the connected PoE Powered Device (1-8)
- Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
- Up to 8 IEEE 802.3af devices can be powered
- Supports PoE Power, up to 15.4 watts for each PoE port
- Up to 4 IEEE 802.3at devices can be powered
- Supports PoE Power, up to 30 watts for each PoE port
- 120-watt PoE budget
- Auto detection of the connected powered device (PD)
- Anti-interference protection
- Remote power feeding up to 100m
- Supports Auto negotiation and Auto MDI/MDI-X functions
- Store-and-Forward architecture
- Supports IEEE 802.3x flow control for Full Duplex operation and backpressure for Half Duplex operation
- Address look-up engine, supporting 4K absolute MAC addresses
- 192 KB packet buffer
- Supports 9K Jumbo frames at 1000Mbps speed duplex mode
- Automatic address learning and address aging
- Supports CSMA/CD protocol
- LED indicators for Power/ PoE status/ Speed/ Link & Activity on each port
- External power supply: 51V 2.5A
- Fanless silent device
- Dimensions : 103 x 235 x 27 mm - 630gr