IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Réf. : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

PLANET IGS-4215-4P4T Industrial Switch 8 Giga Ports 4 PoE+

Réf. : 314846

The PLANET IGS-4215 4P4T2S is a layer 2 industrial switch with 8 Ethernet Gigabit ports including 4 PoE+ ports. In addition, the 2 dual-speed SFP ports provide fiber optic connection.
The switch can supply 30 W per port. In addition, two dual-speed SFP ports are available for fiber optic connection. The switch supports the usual layer 2 functions, including VLAN, IGMP, and Spanning Tree, as well as a smart PoE management function. If after 3 attempts, there is no answer, the switch automatically reboots the device and sends an E-mail notification to the network administrator. There is no need to send a technician to reboot the switch.
The programming schedule disconnects the power supply of idle devices connected to the switch. It is
easier to disable Wi-Fi hot-spots or telephones during the night, while keeping active the CCTV system.

PLANET IGS-624HPT Industrial Switch 4x Giga PoE+2 SFP Ports

Réf. : 314862

The PLANET IGS-624HPT is an Industrial Gigabit 802.3at PoE+ Switch providing non-blocking wire-speed
performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment.
It provides 4-port 10/100/1000Base-T copper with 802.3af/at PoE injector and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system.
The IGS-624HPT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from
-40 to 75 degrees C.
To fulfill the demand of High Power PoE for network applications, the IGS-624HPT provides 4 10/100/1000Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30-watt of power output and data per port over one Cat.5E / 6 Ethernet cable.
With totally 120-watt PoE output capability on the whole system, the IGS-624HPT is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.
The IGS-624HPT Industrial Gigabit PoE+ Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair.

PLANET IGS-604HPT-RJ Industrial IP67 Giga Switch 6 P +4 PoE+

Réf. : 314864

The PLANET IGS-605HPT RJ is a layer 2 industrial switch with 6 Gigabit ports including 4 PoE+ ports.
All the RJ-45 connectors are sealed by a cable gland. The housing is fully weatherproof and the switch can be installed outdoors. The 4 x PoE+ can supply the power to wireless cameras and hot-
spots. The automatic Reset function activates an E-mail/ SNMN trap notification to the network administrator, in case of an undesirable event.
The two non-PoE ports are dedicated to Internet access, and the connection of an NVR or Wi-Fi controller.

PLANET IGS-10020PT L2 Industrial Switch 8 Giga PoE & 2 SFP

Réf. : 314890

The PLANET IGS-10020TP was designed for IP and Hot-spot installation, indoor and outdoors.

The 2 dual-speed fiber ports and layer 2+ advanced management functions provide smooth video and data flows. The 8 PoE ports make it simple to install CCTV networks and wireless communication in places where there is a lack of power outlets.

The switch supports Watchdog function, which automatically reboots idle PoE devices, thus preventing
the hassle of sending a technician on site for maintenance each time a camera is down.

In addition, the programming schedule makes it possible to setup the powering on/off of connected PoE devices. For example, you can disable the wireless APs during the night, whilst keeping the IP camera activated, preventing any intruder to use your wireless network during the night without compromising your CCTV network.
The switch is also equipped with the usual layer 2+ features, such as VLAN, IGMP, Spanning Tree, QoS, and can be remotely accessed, in-band (web/SNMP) and out-band (RS-232 protocol)

Planet IGS-10020HPT L2 Industrial Switch 8 Giga PoE+& 2 SFP

Réf. : 314892

The PLANET IGS-10020 HPT was specifically designed for IP camera and wireless hot-spots installation, indoors and outdoors.
The two dual-speed fiber ports and layer 2 management functions provide smooth video and data flows.
The 8 PoE ports make it easier to deploy the system in spots where there is a lack of power outlets.
The switch supports Watchdog function, which automatically reboots idle PoE devices and facilitates the maintenance.

PLANET POE-152 Gigabit PoE Injector Endspan 15.4W

Réf. : 410152

The PLANET POE-152 is an IEEE 802.3af Power over Ethernet Injector, which provides and inserts DC 48
volts over category 5 cable. The data and the power are sent over a single twisted pair cable to the
IEEE802.3af compliant connected device.
The PLANET PoE-152 provides Gigabit Ethernet connectivity. You can connect an IEEE802.3af-compliant end-node device, such as a wireless AP, IP telephone, IP camera with PoE port.

Key features :

- Compliant with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u/802.3ab 10/100/1000Base-T
- Provides DC 48V power over RJ-45 Ethernet cable to the connected device
- LED for power input indication
- Transmission distance: up to 100 meters
- Auto-detection of POE IEEE 802.3af equipment, protecting damage due to an incorrect installation
- Cable required: EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T

PLANET POE-164 30W at High Power over Ethernet Injector

Réf. : 410163

As the applications of Power over Ethernet have expanded to home users from the IT industry. PLANET has developed a new Single-Port PoE+ Injector which meets the requirements of both the IT industry and home users for high wattage output and easy installation.
The POE-164 is a wall-mountable single-port 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-164 helps users to utilize just one Ethernet cable to easily install and deploy IP cameras, wireless APs or VoIP phone networking in environments where power outlets are hard to find.

Specifications:

- 2-port RJ-45 interfaces
- 1-port Data + Power output
- 1-port Data input
- 1 AC 100-240V input power socket
- 1-port High Power over Ethernet Mid-Span PSE
- IEEE 802.3at Power over Ethernet Plus compliant
- Backward compatible with IEEE 802.3af Power over Ethernet
- Supports PoE Power up to 30 watts for PoE port
- Up to 1 IEEE 802.3at device powered
- Provides DC 53V power over RJ-45 Ethernet cable to a device equipped with an Ethernet port
- Auto-detection of PoE IEEE 802.3at/af equipment and devices from being damaged by incorrect installation
- Remote power feeding up to 100m
- All-in-one design with internal power supply
- Compact size plastic case
- LED indicators for Power LED and Active LED (PoE ready/In-use)