PLANET POE-152 Gigabit PoE Injector Endspan 15.4W

Réf. : 410152

The PLANET POE-152 is an IEEE 802.3af Power over Ethernet Injector, which provides and inserts DC 48
volts over category 5 cable. The data and the power are sent over a single twisted pair cable to the
IEEE802.3af compliant connected device.
The PLANET PoE-152 provides Gigabit Ethernet connectivity. You can connect an IEEE802.3af-compliant end-node device, such as a wireless AP, IP telephone, IP camera with PoE port.

Key features :

- Compliant with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u/802.3ab 10/100/1000Base-T
- Provides DC 48V power over RJ-45 Ethernet cable to the connected device
- LED for power input indication
- Transmission distance: up to 100 meters
- Auto-detection of POE IEEE 802.3af equipment, protecting damage due to an incorrect installation
- Cable required: EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T

PLANET POE-164 30W at High Power over Ethernet Injector

Réf. : 410163

As the applications of Power over Ethernet have expanded to home users from the IT industry. PLANET has developed a new Single-Port PoE+ Injector which meets the requirements of both the IT industry and home users for high wattage output and easy installation.
The POE-164 is a wall-mountable single-port 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-164 helps users to utilize just one Ethernet cable to easily install and deploy IP cameras, wireless APs or VoIP phone networking in environments where power outlets are hard to find.

Specifications:

- 2-port RJ-45 interfaces
- 1-port Data + Power output
- 1-port Data input
- 1 AC 100-240V input power socket
- 1-port High Power over Ethernet Mid-Span PSE
- IEEE 802.3at Power over Ethernet Plus compliant
- Backward compatible with IEEE 802.3af Power over Ethernet
- Supports PoE Power up to 30 watts for PoE port
- Up to 1 IEEE 802.3at device powered
- Provides DC 53V power over RJ-45 Ethernet cable to a device equipped with an Ethernet port
- Auto-detection of PoE IEEE 802.3at/af equipment and devices from being damaged by incorrect installation
- Remote power feeding up to 100m
- All-in-one design with internal power supply
- Compact size plastic case
- LED indicators for Power LED and Active LED (PoE ready/In-use)

PLANET POE-2400G 24-Port Web Smart PoE Injector Hub- 400 W

Réf. : 412440

The PLANET POE-2400G PoE injector hub supports 24 ports that can supply the power to 24 IEEE802.3af devices over RJ-45 cable.

The management functions provide an easy way to allocate the power supply following a priority rule of 1 to 4.

Product features:

- 24 x RJ-45 Gigabit input ports
- 24 x RJ-45 Gigabit output ports with PoE+ function/802.3af/at - MidSpan (pin 4/5/7/8)
- Supports 1 x RJ-45 port dedicated to the web management (192.168.0.100 - admin/admin)
- Output power: 48 V (15.4 W/ 350mA)
- Each PoE output port can supply up to 30.8W
- Total power budget: 440W
- Web-based configuration via Outband port
- 19''-rackmount/ 1U
- Internal power supply: 100~240 V

PLANET RKE-10A Mounting Kit

Réf. : 410810

Fixing brackets for installation of a PLANET switch into a 10'' cabinet

Compatible with the following switches :

- FSD-804P : sku 410804
- GDS-800S : sku 411800
- GSD-804P : sku 411804
- GDS-1020S : sku 411812

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410231

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410232

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410233

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

PLANET WGSW 24040HP L2 Switch 24 Giga PoE+440W+SFP

Réf. : 411244

The PLANET WGSW-24040HP4 layer 2 switch was designed to make CCTV & Wi-Fi hot-spot installation easier with a PoE+ power budget and extended management functions. The switch is also suited for VoIP applications and has 4 x SFP fiber ports. The PoE+ budget of 440 W supply the power to 14 x night/day PTZ IP cameras requiring 30 W each or 24 x IP cameras requiring 15 W each.

Besides, the Watchdog function controls the status of each connected camera and launches automatic rebooting in case of a link loss, saving the hassle of going checking on site.
The switch also has an embedded schedule, which supplies only the amount of power needed depending on the context.

Main features:

- 24-port 10/100/1000BASE-T Gigabit Ethernet RJ45 with IEEE 802.3af / 802.3at PoE Injector
- 4 100/1000BASE-X SFP slots, shared with port 21 to port 24 compatible with 100Base-FX SFP
- RS-232 DB9 console interface for switch basic management and setup
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support: Broadcast / Multicast / Unknown-Unicast
- VLAN/STP/Link aggregation/QoS
- Advanced security functions
- PoE+ 440 W