DEXLAN DVI USB KVM Extender with Audio & Microphone -50 M

Part/number : 050004

This kit will extend the distance between a PC and connected devices at low cost. The distance can reach 50 meters without any quality loss.
The transmitter and receiver units are connected over 2 basic RJ-45 cords (category 5 and over).

Specifications:

- High definition two-directional audio and video data transmission
- Ports on the transmitter side: 1 x DVI-D / 1 x USB 2.0 type B / 2 x RJ-45
- Ports on the receiver side: 1 x DVI-D / 3 x USB 2.0 type A / 2 x RJ-45 / audio
- Equalizer button to adjust the image depending on the distance
- Maximum resolution: 1920 x 1200 (40 m), 1080p (40 m), 1080i(50 m)

Dexlan kvm extender over CAT5 vga/usb 100M

Part/number : 050009

The 050009 DEXLAN kit includes a transmitter and a receiver, connected over RJ-45 cord. The connection distance between the KVM console and the computer can be increased up to 100 meters over a single cable.
In addition, the receiver includes a USB to PS2 converter, which allows the connection of a PS2 keyboard or mouse with MiniDin6 interface.

Product features:

- Maximum resolution: 1920 x 1200 (30m)/ 1280 x 1024 (100m)
- Compatible with CRT and LCD screens, in VGA/SVGA/SXGA/UXGA/WUXGA modes
- Compatible with the following protocols: DDC/DDC2/DDC2B
- Mini transceiver dongle, self-powered with 20-cm cord
- 50-cm USB cord embedded to the VGA plug
- Metal housing
- 5V DC / 230 V AC power adapter included
- 1 x VGA HD-15 female port
- 2 x USB Type A female ports
- 1 x PS2 port (purple=keyboard)
- 1 x PS2 port (green=mouse)
- Dimensions: 124 x 75 x 22mm/ 270g
- Compatible with all USB-based operating systems, no additional driver required

Dexlan extender kvm hdmi / usb over ip ethernet gigabit

Part/number : 050012

High Definition HDMI through the local network!
The DEXLAN HDMI / USB over IP extension kit allows you to move your HDMI and USB console up to 100m from your computer connecting the 2 transmitter / receiver boxes by a simple cord RJ45, Category 5
or 6 (6a recommended).
The DEXLAN HDMI / USB offset kit uses an Ethernet signal Gigabit and allows to overcome the limitation to 100 meters from standard network, connecting it to a gigabit network switch supporting
IGMP management (level 2 recommended). The distance between the 2 boxes is then limited only by your
LAN infrastructure.
In addition, it is also possible to use media converters Gigabit Ethernet allowing to convey the signal with optical fibers to exceed distances from meters to kilometers.
The DEXLAN HDMI / USB over IP Remote Kit works in point to point.

The Plus products:
¦ moves a full set keyboard / screen / mouse up 100m from the computer
¦ Compliant with USB touch screen

Specifications:
- Ports on Transmitter :
1 female HDMI port
1 USB Type A female port (PC connection with USB A / A cable 1.20m provided)
1 RJ45 Gigabit Ethernet 1000Mbps auto-MDiX port
1 Power Port Jack 5.5 / 2.1 5V 1A
1 Reset button
- Ports on receiver:
1 female HDMI port
2 USB Type A ports (for USB keyboard and mouse)
1 RJ45 Gigabit Ethernet 1000Mbps auto-MDiX port
1 power port Jack 5.5 / 2.1 5V 2A
1 reset button
- Max Resolution: 1920 x 1080p @ 60Hz
- Compatible standards: HDMI 1.3 and HDCP 1.2
- Direct link box case (Unicast): Maxi 100m
- Local network link: Max distance 100m between 2 active components (gigabit switch supporting IGMP)
- Operating temperature: 0 to 50 ° C

Technical note: all kits have the same IP address for transmitters and receivers, to coexist several
kits without IP address conflict on the same Ethernet network it is essential to configure the switch with VLAN Access mode to isolate each kits on a different VLAN

VGA KVM & USB,RS232,IR audio over IP- Transmitter

Part/number : 050014

This extender kit is a versatile solution that can combine multiple interfaces and that can be installed with your existing equipment.

Specifications:

- Extends and distributes HDMI/VGA/DVI signal with two-directional RS-232, analog audio and USB signal over LAN
- Supports Windows-based management software, using PC computer for easy setting input/output link
- Supports Android/iOS APP control
- Selection of the input source by front panel button
- Embedded RS-232 distribution function, sending RS-232 signal from one TX to multiple RX modules
- IGMP support, up to 8K Jumbo frame packet management
- Perfect for large scale remote HD content access and security monitoring systems, digital media applciations.
- Résolution : HDMI 1080p / VGA-DVI 1920 x 1200
- Automatically changes the VGA signal into DVI or HDMI signal and vice-versa
- Supports loop port on the transmitters for a local display
- Compatible with the DHCP server on your network
- Up to 16 transmitter modules and 254 receiver modules can be installed on the same IP
- Maximum connection distance between 2 active devices: 150 meters over category 5e cable

Supports the following operating modes:

- Point to Point direct connection (Extender)
- Point to Point with switch connection (Extender over LAN)
- Multiple TX to Multiple RX via switch connection
- Multiple TX to Multiple RX connection (matrix switcher)
- Multiple TX to one RX connection (KVM switcher over IP)
- One TX to Multiple RX connection (splitter)

HDMI/ USB2.0 4K Dual Screen KVM switch with Audio

Part/number : 061092

The DEXLAN Dual Screen HDMI ® 4K switch controls up to 2 computers from a single keyboard/monitor/mouse console.
The switch supports 3D video flows and high resolutions up to Ultra HD 4K2K
The Dual Screen KVM switch supports extended desktop and clone modes, easily adaptable depending on your preferences.
The HDMI ports are compatible with DVI and DisplayPort interfaces with optional adapters.

Product features:

- Resolution: 480i, 480p, 576i, 720p, 1080i, 1080p, 4k2K (3840 x 2160)
- USB console: keyboard/ monitor/ mouse
- Switching operation by hotkey sequence, push button and IR remote control
- Audio jack for microphone
- Power adapter: 5V/ 1A
- Optional combo cords, please get the following for each UC: 1 x USB2.0 A/B, 2 x HDMI male/ male

HDMI 1.4 KVM Switch, 4k UHD, USB, audio, 4-way, desktop

Part/number : 061093

- HDMI interface, max. resolution up to HDMI 1.4 4k2k @30Hz and 1080p @60Hz
- fully HDCP compliant
- for Windows, Mac, game consoles, etc.
- Switch by button or shortcut (Ctrl + Ctrl + channel number 1,2,3,4)
- Power supply via USB (optional power supply unit possible)
- Supplied with 4 combined 1.8m cables (HDMI+USB+Audio)

HDMI/ USB2.0 4K Dual Screen KVM switch with Audio

Part/number : 061094

The DEXLAN Dual Screen HDMI ® 4K switch controls up to 2 computers from a single keyboard/monitor/mouse console.
The switch supports 3D video flows and high resolutions up to Ultra HD 4K2K
The Dual Screen KVM switch supports extended desktop and clone modes, easily adaptable depending on your preferences.
The HDMI ports are compatible with DVI and DisplayPort interfaces with optional adapters.

Product features:

- Resolution: 480i, 480p, 576i, 720p, 1080i, 1080p, 4k2K (3840 x 2160)
- USB console: keyboard/ monitor/ mouse
- Switching operation by hotkey sequence, push button and IR remote control
- Audio jack for microphone
- Power adapter: 5V/ 1A
- Optional combo cords, please get the following for each UC: 1 x USB2.0 A/B, 2 x HDMI male/ male

KVM Switch DisplayPort /USB with Audio + Cables- 2 Ports

Part/number : 063042

USB 2-port Displayport KVM Switch with combo cables.
Switching operation of the DisplayPort graphic signal, mouse, USB keyboard, USB2.0 devices, stereo speakers and microphone between 2 computers.
Specifications:

- Supports USB keyboard and mice
- USB2.0 sharing : two USB 2.0 hub ports can be switched with or without the KVM ports.
- Audio sharing: same features (with or without KVM ports)over 3.5-mm stereo jack for speaker connection, micro or headset
- DisplayPort connector: Computer with DisplayPort connector (DVI screen boards, VGA/ HDMI not compatible)
- The screen can have a DisplayPort or Mini DisplayPort input
- DisplayPort resolution up to 2560 x 1600
- Also supports the digital audio signal via DP (depending on the graphic boards)
- Switching operation: Push button/ Hotkey sequence
- Power supply included
- Compatible with Windows 2000/XP/Vista/7, Linux, MacOSX 10.5.x and over
- Comes with 2 combo cables: DisplayPort, USB2.0, audio 3.5 mm, 1.80 m
Connectors:
On the PC side : 2x DisplayPort + 2x USB 2.0 B Female, 4x 3.5-mm audio jacks
On the console side : 2x USB type A Female for keyboard/ mouse or USB hub
- 1 x DisplayPort for one screen
- 2 x 3.5-mm audio jacks for stereo speakers and microphone
- Metal housing: 165 x 110 x 45 mm

COMBO KVM CABLE VGA/PS2+USB- 1,80M

Part/number : 066302

Universal combo cord for DEXLAN KVMs. Equipped with connectors which can fit most PC or Mac computers and all DEXLAN KVM switches.

- On the KVM side: Supports one single Super HD-15 male connector
- On the computer side:

1 x VGA HD-15 male connector (bue)
1 x MiniDin 6 male keyboard connector (purple)
1 x MiniDin 6 male mouse connector (green)
1 x USB type A male connector

USB-PS/2 Combo KVM switch with OSD menu- 8 Ports

Part/number : 066400

This KVM switch can control up to 8 local servers. You can setup a remote Internet access by adding
the optional IP module (P/N #066401).

Product features:

- Combo console port : VGA USB & PS2
- 8 x 15-pin SPHD connectors for DEXLAN cable connection
- Switching operation: by hotkey sequence, push button or OSD menu
- IP management via optional IP module (P/N #066401)
- Maximum resolution: 1920 x 1080 @75 Hz
- 19'' rackmount, 1U
- External power supply included: 12V/1A
- VGA/PS2-USB combo cords not included (P/N 066302=1.80m, P/N 066303=3m, P/N 066305=5m)

Note : the KVM Switch DEXLAN #066400 is not compliant with old Console-over-IP module #066301, you should only use #066401 with the KVM Switch to add remote access over IP.

USB PS/2 Combo KVM Switch with OSD Menu- 8 Ports

Part/number : 066410

PREMIUM HIGH SPEED HDMI Cable WITH ETHERNET-3M

Part/number : 127698

Premium High Speed HDMI Cable with Ethernet- 5m

Part/number : 127699

PREMIUM HIGH SPEED HDMI Cable WITH ETHERNET-1M

Part/number : 127816

The HDMI® official certification guarantees that the cord is compliant with HDMI2.0 specifications and is of outstanding quality. The QR code sticker allows you to authenticate the cord. To do this, please use the HDMI Premium Cable application, downloadable from Google Play or the App Store.

The cord was specifically designed to go beyond the standard:

- Triple shielding for optimum protection against electromagnetic interference that can be present in the environment or generated by the connected devices.
- Metal shells around the connectors providing a continuous binding between the cord and the connector.
- The connector pins are 10 times the size of that of a traditional cord, providing enhanced resistance to continuous connection/ disconnection and avoiding contact failures.
- High-quality components (oxygen-free copper with tin)
- Ferrite-free jacket, facilitating the installation if you must run the cord into a conduct or bend
the cord.
- The HDMI2.0 specifications are supported by the connected devices as follows:
o Bandwidth: 18Gbps/ 600MHz
o Resolution: 4K/ Ultra HD/ 2160p to 60Hz (4:4:4)
o 3-D support
o High Dynamic range
o Supports up to 32 audio channels up to 1536KHz sample rate
o Dolby Digital Plus, True HD, Digital & DTS
o Multiple video streams on a single screen, and multiple audio streams
o Display format: 21:9
o Audio/video flow dynamic synchronization
o Enhanced CEC controls

PREMIUM HIGH SPEED HDMI Cable WITH ETHERNET-1.5 M

Part/number : 127831

PREMIUM HIGH SPEED HDMI CABLE WITH ETHERNET- 2M

Part/number : 127836

DEXLAN Patch Panel with cable management bar- 16 ports

Part/number : 258151

Specifications:

- Number of slots: 16 slots for keystones (not included)
- Shielding: UTP
- 19''-rackmount design
- Height: 1U
- Cable management bar on rear
- Identification tags

DEXLAN Patch Panel with cable management bar- 24 ports

Part/number : 258152

Specifications:

- Number of slots: 24 slots for keystones (not included)
- Shielding: UTP
- 19''-rackmount design
- Height: 1U
- Cable management bar on rear
- Identification tags

DEXLAN 1U patch panel with cable bar - 16 Ports for FTP Keystones

Part/number : 258155

- Number of spaces: 16 for keystones (not included)
- Shielding: STP (compatible with UTP)
- 19''-rackmount
- Height: 1U
- Grounding braid on rear
- Labels for localization

DEXLAN 1U patch panel with cable bar - 24 Ports for FTP keystones

Part/number : 258156

- Number of spaces: 24 (keystones not included)
- Shielding: STP (compatible with UTP)
- 19'' rackmount
- Height: 1U
- Grounding braid on rear
- Labels for localization

RJ45 Wallmount Box 45 x 45 mm

Part/number : 272020

- Wallmount box for 45 x 45 mm plate
- The plate is set with 2 screws on the box.

Plate frame for RJ45 Wallmount Box-270220

Part/number : 272200

Plate frame for 45 x 45 mm jack
2 screws and label support

DEXLAN Line Coupler RJ45 category 6- Shieded

Part/number : 272220

Shielded RJ45 female/female coupler : connection of 2 RJ45 male/male patchcords for network line extension in case it is too short.
10/100/Gigabit network compatible
Straight cable plan

DEXLAN Line Coupler RJ45 category 6- Shieded

Part/number : 272221

Shielded RJ45 female/female coupler : connection of 2 RJ45 male/male patchcords for network line extension in case it is too short.
10/100/Gigabit network compatible
Straight cable plan

DEXLAN CAT6 STP RJ45 KEYSTONE JACK

Part/number : 272885

DEXLAN Category 6a FTP Keystone

Part/number : 272919

Category 6a RJ-45 keystone, for solid-wire cable and stranded-wire cable

Product features:

- Category 6a
- Shielding: FTP class EA
- Compatible with solid-wire cable and stranded-wire cable: AWG23-AWG26
- Compatible with the following standards: ANSI/TIA 568C.2, ISO/IEC 11801
- Connection: screwless, self-stripping connectors
- Contacts: gold, 50 microns
- Compatible with high-density patch panels
- Certifications: DELTA, 3P, ETL, UL
- Dimensions : L16 x H20 x P34 mm

DEXLAN Category 6a FTP Keystone

Part/number : 272925

Category 6a RJ-45 keystone, for solid-wire cable and stranded-wire cable

Product features:

- Category 6a
- Shielding: FTP class EA
- Compatible with solid-wire cable and stranded-wire cable: AWG23-AWG26
- Compatible with the following standards: ANSI/TIA 568C.2, ISO/IEC 11801
- Connection: screwless, self-stripping connectors
- Contacts: gold, 50 microns
- Compatible with high-density patch panels
- Certifications: DELTA, 3P, ETL, UL
- Dimensions : L16 x H20 x P34 mm

CAT6A ftp keystone jack

Part/number : 272928

Graphic Card USB-A 3.0 M to HDMI F Adapter Cable

Part/number : 304905

Add a graphic card to your computer in a snap!

This USB3.0 to HDMI display adapter support Full HD 1080p resolution (800 x 600 in USB2.0).
You can connect a second display, even a brand new model.

Product benefits:

- Fast and easy installation over USB3.0 interface
- Supports pixel rate ranging from 25MHz to 165MHz
- DTV resolution: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
- Monitor resolution: VGA, SVGA, XGA, SXGA, and UXGA
- Low-cost solution

Main features:

- Computer connection interface: USB3.0 (down-compatible with USB2.0 but with a lower resolution)
- Display connector: 1 x HDMI connector
- Total length: 25 cm
- Maximum resolution:
1920 x 1080 using USB3.0 computer port
800 x 600 using USB2.0 computer port

- Chipset: Fresco Logic FL2000
- Suport Windows 7/8.x/10 OS and Mac OSX 10.10 and up

Notes:

The driver is embedded to the device, and will install upon connection. No driver CD included
The FL2000 chipset performances depend on the USB3.0 controller. For optimum compatibility, please select Intel USB3.0 xHCI host controller/ FL1100 xHCI host controller

Firmware update available for downloading at:

http://support.frescologic.com/portal/home

PCIe I/O Combo Card LP- 2 x RS232 Serial + 1 x Parallel

Part/number : 306587

PCI-EXPRESS CARD WITH 2 x RS-232 SERIAL PORTS AND 1 PARALLEL PORT
- Supports 2x UART serial port
- Built-in 16C550 compatible UART with 16 byte transmit-receive FIFO
- Data transfer rate up to 230400bps
- Parallel data transfer rate up to 1.5MB/Sec

PCI express Card- 2 x RS232 DB9 serial ports

Part/number : 306588

PCI-EXPRESS CARD WITH 2 PORTS SERIAL RS-232
- Supports 2x UART serial port
- Build in 16C550 compatible UART with 16 byte transmit-receive FIFO
- Data transfer rate up to 230400bps

PCI Express Host Adapter for M.2 NGFF PCIe SSD

Part/number : 307625

Shift up a gear!

This NGFF to PCI-express adapter increases the performances of your system. You+ll take advantage of
the M.2 SSD in PCI-Express mode.

Product benefits:

- Easy and rapid connection of an M2 SSD to your motherboard
- Throughputs up to 32Gbps instead of the traditional 6 Gbps of SATA interface
- Transparent to the operating system, no drivers needed

Main features:

- Includes standard and low-profile slot brackets
- Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260 and 2242 SSD
- Connectors on the SSD side: M.2 NGFF type 2280-D5-M
- Connectors on the motherboard side: PCI-Express x4
- Includes 2 mounting screws
- Compatible with the following OS: 10, Win8.1, Windows Server 2012 R2, Linux, Fedora, SUSE, Ubuntu,
Red Hat

Fast Ethernet Network adapter, 100 Mbit/s, USB

Part/number : 310622

- 100/10 Mbit/s, RJ45
- USB 2.0
- Chipset: ASIX AX88772
- USB cable 8 cm
- for Windows 98SE/ME/2000/XP/Vista/7 (32/64)/Win CE6/5/4.2, FreeBSD, Linux, Mac OS 10.x (for Win 8/8.1 no driver required)

DEXLAN USB3.0 to 3 port USB3.0 with Gigabit Ethernet

Part/number : 310723

DEXLAN USB3.2 Gigabit Network Adapter With Cable

Part/number : 310725

Get Gigabit speed over USB interface !
Install the Dexlan USB3.0 network adapter on a 5 Gbps USB 3.0 port
The flows are steady even for streaming or HD video capture and the data transfer rate is faster.

Product features:

- USB3.0 5Gbps port, down-compatible with USB2.0/1.1
- RJ-45 10/100/1000 Mbps port
- Powered by the USB port
- Supports IPv4/ IPv6, IGMP, VLAN Tag, Wol, Jumbo Frames
- Chipset: ASIX AX88179
- Compatible Windows XP/Vixta/7/8/8.1/10 32/34 bits, MacOS 10.6 and over, Linux, Android, ARMv5/6/7,
WinCE 5/6/7

DEXLAN USB Type-C to RJ45 Gigabit Ethernet Adapter

Part/number : 310729

Gigabit at full speed on USB Type-C!
Take advantage of the 5Gbps bandwidth of your USB 3.1 or Thunderbold 3 ports to install the Dexlan USB 3.1 Type-C network adapter.
Gain fluency for all demanding applications like streaming or HD video capture and boost your data transfer rate.

The most products:
¦ Quick installation Plug & Play!
¦ Self Powered through USB port

Specifications:
¦ USB 3.1 Gen1 5Gbps USB 3.0 / 2.0 / 1.1 compatible port
¦ RJ45 port 10/100 / 1000Mbps
¦ IPv4 / IPv6 compatible, IGMP, VLAN Tag, Wol, Jumbo Frames
¦ Windows 10 32/64 bit compatible, MacOS 10.10 and later, ChromeOS
¦ Works with Smarphones and tablets equipped with USB Type-C connectors

USB-C to HDMI2.0(4K/60Hz)+2USB3.0+RJ4 5 +SDcard+PD3.0(100W)

Part/number : 310747

USB3.1 type-c hdmi + DP + Gigabit with power delivery

Part/number : 310757

The optimal USB Type-C mini docking station for your mobile phone!

Lightweight and portable, this USB 3.1 adapter uses the new Type-C reversible connector to connect to your computer and add 5 additional communication ports. add
a 4K HDMI display or VGA display, connect to the Gigabit Ethernet network and have a USB Type A port
to connect all your devices.
In addition, the USB 3.1 Type-C Mini Dock is also compliant with the USB Power Delivery standard with its port specifically dedicated to the mains supply of your device. It allows to continue to recharge the
internal battery simultaneously with the extensions made.

The plus product:
¦ Adds 8 ports to your computer from a single USB 3.1 Type-C port
¦ USB Type-C reversible, connects easily without the need to return the plug!
¦ Power Delivery Port: Connect the device instead of the power supply and continue charging via the Type-C female port
¦ ''windows like workstation'' interface with certain smartphone model (Samsung S9, HUAWEI P20 ...)


Specifications:
¦ Standard USB 3.1 Gen.1 with max transfer rate of 5Gbps
¦ HDMI port: 4K2K @ 30hz, HDCP1.4 support, 3D function
¦ VGA port: 1080P @ 60HZ, Compatible with YCC RGB specification
¦ Has 2 simultaneous video ports: VGA and HDMI 1080p max resolution if VGA + HDMI connected
¦ SD Memory Card Reader 2.0 Max transmission 40Mbps
¦ Stable broadband network connection via RJ45 Gigabit Ethernet port
¦ USB Type-C Female Port: 2 simultaneous Power Delivery and Data Transfer functions
¦ USB charging Type-C: Power Delivery Maximum deliverable power 20V3A
¦ Power Delivery version 3.0, no disruption of connected devices while charging
¦ 2 USB 3.1 Type A female ports for all USB 3.0 / USB 2.0 / USB 1.1 devices
¦ Self-powered by USB Type-C
¦ Audio port : Jack 3.5mm triple ring

Note # 1) the docking station integrates the Power Delivery function via the USB Type-C into the 20
-volt 3-amp voltage limit, so it is suitable for MacBook 12 '' (29W power supply) and MacBook Pro 13
'' (61W power supply). Do not use with a 15 '' MacBook Pro that requires a 87W power supply.

Note # 2) The docking station has a function equivalent to Samsung's ''DEX'' allowing with certain compatible smartphone model, to display a desktop workstation after connecting to an HDMI screen.

Dexlan 14-in-1 Dockingstation für 3 Bildschirme, 4K Ultra HD, LAN, 100 W PD, 6 Port USB Hub, Audio, Card Reader

Part/number : 310764

DEXLAN USB3.0 Gigabit Network Adapter With Cable

Part/number : 310765

Get Gigabit speed over USB interface !
Install the Dexlan USB3.0 network adapter on a 5 Gbps USB 3.0 port
The flows are steady even for streaming or HD video capture and the data transfer rate is faster.

Product features:

- USB3.0 5Gbps port, down-compatible with USB2.0/1.1
- RJ-45 10/100/1000 Mbps port
- Powered by the USB port
- Supports IPv4/ IPv6, IGMP, VLAN Tag, Wol, Jumbo Frames
- Chipset: ASIX AX88179
- Compatible Windows XP/Vixta/7/8/8.1/10 32/34 bits, MacOS 10.6 and over, Linux, Android, ARMv5/6/7,
WinCE 5/6/7

Alu Laptop Stand with 9 in 1 USB-C Docking station

Part/number : 310790

HEIGHT ADJUSTABLE ALUMINUM LAPTOP RISER For 11''-15'' Laptops, Tablets, Books and More

Maintain better posture while using your laptop with our AR-15 of height adjustable ergonomic laptop
riser. AR-15 is adjustable in laptop height and angle, you can raise the laptop screen height flexibly to reduce your neck fatigue, say goodbye to neck pains. Aluminum construction provides a sleek, lighter, and elegant look. Tiling design raises your laptop at eye level and offers increased
air circulation.

Features :
¦ Ergonomic Design: elevate the screen to eye level for better viewing angle
¦ Multiple Angle Viewing: for optimal viewing position
¦ Good Ventilation: open design offers increased air circulation - working as a heat sink
¦ Aluminum Construction: provides a sleek, lighter, and elegant look
¦ Adjustable Height: matches different viewing needs
¦ Folding Mechanism: fully collapsible for flat storage or transport
¦ Non-Toxic Silicon Pads: protect laptop from being scratched and secure it in stable position

SPECIFICATION
Material : Aluminum
Surface Finish: Sand-blasted Aluminum Anodic Oxidation
Color: Silver
Dimensions: 260x230x160mm (10.2''x9.1''x6.3'')
Applicable Devices: Laptop
Fit Screen Size : 11''~15''
Weight Capacity(per layer): 5kg (11lbs)

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Part/number : 311760

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

10GBase-LR sfp+ module singlemode 10kms + ddm

Part/number : 311825

This bidirectional expansion module was designed for Gigabit Ethernet switches equipped with SFP+ slots. The module supports Digital Diagnostic function, based on the SFF-8472 industrial standard. This function allows the device to receive real-time information (input/output signals, laser temperature...)

Product features:

- Fiber optic port: Duplex single-mode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 10 km over 9/125µm (OS1 5km/OS2 10km)
- Compatible with the following standards: IEEE802.3ae 10GBASE-LR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function: SFF8472 Rev.9.2
- Wavelength: 1310nm
- Data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with Multi-Source-Agreement (MSA)
- Hot-swappable
- Compliant with SFP form factor: 57 x 13.3 x 8.5 mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

10GBase-SR sfp+ module multimode 300m +ddm

Part/number : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

Dexlan L2+ managed switch 24P sfp dual speed + 4 giga combo

Part/number : 320231

The DEXLAN 890230 is a cost efficient and high-performance L2+ Ethernet management switch, equipped with 24 Dual Speed SFP ports (100/1G) and 4 x combo RJ45/ SFP.
The switch supports remote management by SNMP, Http and Telnet interfaces, and local management by console interface.
The switch is equipped with multiple L2 management functions, such as: 802.1Q VLAN, 802.1x Security,
Rate Control, Port Configuration, Port Mirroring, Port Statistics, QoS functions, ... etc

Features :

- 24 x SFP ports, supports 100Base FX or 1000Base-X Interface Port 1-24: 100/1G SFP Port
- 4 x RJ45 ports, Combo with SFP port 20-24 auto-detect RJ45/SFP connection
- IPv6 management
- IPv4 Static routing
- 8 priority queues are supported on each port for QoS application
- Port-based VLAN, 802.1Q VLAN, Voice VLAN and Q-in-Q(double tagging) function
- Protected Port and LoopBack Detection function
- IEEE 802.1x security function, and VLAN assignment, Guest VLAN functions
- Static Mac address access limit and Dynamic Mac address number on port
- IEEE802.1d & 802.1w & 802.1s
- IP Multicast with IGMP snooping / query / fast leave / filtering /group limited /MVR
- DHCP Client / DHCP Option 82 Relay / DHCP Snooping function
- ACL function for L2 ~ L4 packet control, Ingress/Egress rate control on port
- Broadcast/Multicast/Unicast storm control
- ARP inspection / IP source guard
- RMON 1,2,3,9
- SFP Transceiver DDMI function
- Remote port configuration setting and statistics monitoring
- Text configuration download and upload

Specifications :

- Console Port RS-232 DB9 Male
- CPU 416MHz MIPS 24KEc CPU as the main processor which integrated on switch controller
- Memory Flash : SPI 16M Bytes , RAM:DDRII 128M Bytes
- Packet Buffer 512K Bytes
- Mac Table Size 8K
- Max Packet Size 9600 Bytes
- Switch capacity: 48Gbps
- Forwarding Rate: 35.7Mpps
- LED Indicators : Per Port : Link/Act - Per Device : Power and System
- Internal Power supply 100~240VAC, 50/60 Hz
- Operating temperature : 0°C to 50°C
- Operating Humidity:10% to 90% (Non-Condensing)
- Dimension 440 x 172 x 44 mm

Layer 2+ features :

- Port Control
- Port speed, duplex mode, and flow control
- Port Auto MDI/MDI-X
- Port frame size (jumbo frames), Maximum ingress frame size (10056 bytes)
- Port state (administrative status)
- Port status (link monitoring)
- Port statistics (MIB counters)
- L2 Switching
- Auto MAC address learning/aging and MAC addresses (static)
- DHCP snooping
- ARP inspection
- Port Mirroring
- L3 Switching
- DHCP option 82 relay
- UPNP
- IPv4 Unicast: Static routing
- Flow mirroring
- Virtual sub-network VLANs
- IEEE 802.1Q static VLAN(4096 entries Max.), Voice VLAN,
- Port isolation, Private VLAN Static, MAC based VLAN,
- Protocol based VLAN, IP subnet based VLAN
- Spanning Tree
- IEEE 802.1s MSTP(Multiple spanning tree)
- IEEE 802.1w RSTP(Rapid spanning tree)
- IEEE 802.1D STP(Spanning tree)
- BPDU Guard & Restricted Role
- Error Disable Recovery
- Link Aggregation Static and LACP
- IP Multicast
- IGMP v2 and v3 snooping
- MLD v1 snooping
- IGMP filtering profile
- IPMC throttling, filtering, leave proxy
- MVR and MVR profile
- Quality of Service QoS
- Traffic Classes (8 active priorities)
- Port Default Priority, User Priority,
- Input priority mapping
- QoS Control List (QCL Mode)
- Storm Control for UC, BC and Unknown
- Port policers
- Global/VCAP (ACL) policers
- Port egress shaper
- ueue egress shapers
- DiffServ (RFC2474) remarking
- Tag remarking
- DHCP Client, DNS client, proxy HTTP Server, CLI - Console Port & Telnet
- Text Configuration download or upload
- Management access filtering
- HTTPS
- SSHv2
- IPv6 Management
- System Syslog
- Software Upload via web
- SNMP v1 / v2c / v3 Agent

DEXLAN Gigabit PoE Injector IEEE802.3af 15,4W

Part/number : 321015

This DEXLAN PoE Gigabit injector complies with IEEE802.3af / PSE standards. As Power Source Equipment, it supplies the power to any PoE-compliant Powered Device.
The PoE Gigabit injector supplies the power via RJ-45 cable, so that you can install your IP cameras, IP phones, wireless APs anywhere, even if there is no wall outlet in the area.

Specifications:

- Compliant with IEEE 802.3af standards
- Supplies the power up to a 100-meter cable distance over category 5 cable and over.
- PSE device, automatically detects the power to supply
- Plug-and-Play
- Supports Green Technology: supplies the power only when the PoE device is connected and powered on.
- Standards & Protocols: IEEE 802.3, 802.3u, 802.3af CSMA/CD, TCP/IP
- Compatible with any PoE+ IEEE 802.3af powered device (PD)
- Equipped with 2 x RJ-45 Female ports
- Data input: 1 x RJ-45 Gigabit 10/100/1000 Mbps port with Auto-Negotiation (Auto MDI/MDIX)
- Power input: IEC C14 female plug (IEC C13 cord included)
- PoE output (Data + Power): 1 x RJ-45 Gigabit 10/100/1000 Mbps port with Auto-Negotiation function
- PoE type: Gigabit Mode A (EndSpan) DC+ over pins # 1-2, DC- over pin # 3-6
- 10BASE-T networks: use an UTP / STP category 3, 4, 5 cable (100-meter maximum)
- 100BASE-TX networks: use UTP category 5, 5e, 6 and over (100-meter maximum)
- 1000BASE-T networks: use STP category 5e, 6, 6a and over (100-meter maximum)
- Power and PoE LED indicators.
- PSE LED indicator: checks if the connected device is PoE-compliant
- Dimensions 143x60x40 mm
- Fixing holes at the bottom of the housing
- Side rail for the assembly of multiple DEXLAN injectors
- External power supply : 110/230V AC - with IEC cord included

DEXLAN Switch 6P 10/100 with 4 PoE+ 60W

Part/number : 321024

The DEXLAN 6-port PoE+ switch was designed for small CCTV systems. The housing is made of metal and the device is quite silent. It has 4 x RJ-45 PoE+ ports supplying 30 Watts to PoE cameras, or dual-
band Wi-Fi hot-spots. The 2 additional RJ-45 ports can be used for Internet access and the connection of a network video recorder.

Product features:

- 4 x 10/100 PoE+ ports 30 W max EndSpan
- 2 x 100 Mbps RJ-45 Uplink ports - 150 m. max.
- Power supply included: 48 V / 60 W
- The power budget can be higher with a 48 V extra power supply plugged to the terminal block
- Includes 2 fixing kits (DIN/wallmount)
- Supported temperature range in operation: -10°C to 60°C
- IP-30 Aluminum housing
- 75 W optional power supply, please order PN 314647

DEXLAN Switch 6P 10/100 with 4 PoE+ 60W

Part/number : 321084

The DEXLAN 6-port PoE+ switch was designed for small CCTV systems. The housing is made of metal and the device is quite silent. It has 4 x RJ-45 PoE+ ports supplying 30 Watts to PoE cameras, or dual-
band Wi-Fi hot-spots. The 2 additional RJ-45 ports can be used for Internet access and the connection of a network video recorder.

Product features:

- 4 x 10/100 PoE+ ports 30 W max EndSpan
- 2 x 100 Mbps RJ-45 Uplink ports - 150 m. max.
- Power supply included: 48 V / 60 W
- The power budget can be higher with a 48 V extra power supply plugged to the terminal block
- Includes 2 fixing kits (DIN/wallmount)
- Supported temperature range in operation: -10°C to 60°C
- IP-30 Aluminum housing
- 75 W optional power supply, please order PN 314647

DEXLAN Switch 6P 10/100 with 4 PoE+ 60W

Part/number : 323064

The DEXLAN 6-port PoE+ switch was designed for small CCTV systems. The housing is made of metal and the device is quite silent. It has 4 x RJ-45 PoE+ ports supplying 30 Watts to PoE cameras, or dual-
band Wi-Fi hot-spots. The 2 additional RJ-45 ports can be used for Internet access and the connection of a network video recorder.

Product features:

- 4 x 10/100 PoE+ ports 30 W max EndSpan
- 2 x 100 Mbps RJ-45 Uplink ports - 150 m. max.
- Power supply included: 48 V / 60 W
- The power budget can be higher with a 48 V extra power supply plugged to the terminal block
- Includes 2 fixing kits (DIN/wallmount)
- Supported temperature range in operation: -10°C to 60°C
- IP-30 Aluminum housing
- 75 W optional power supply, please order PN 314647

DEXLAN Switch 6P 10/100 with 4 PoE+ 60W

Part/number : 323110

The DEXLAN 6-port PoE+ switch was designed for small CCTV systems. The housing is made of metal and the device is quite silent. It has 4 x RJ-45 PoE+ ports supplying 30 Watts to PoE cameras, or dual-
band Wi-Fi hot-spots. The 2 additional RJ-45 ports can be used for Internet access and the connection of a network video recorder.

Product features:

- 4 x 10/100 PoE+ ports 30 W max EndSpan
- 2 x 100 Mbps RJ-45 Uplink ports - 150 m. max.
- Power supply included: 48 V / 60 W
- The power budget can be higher with a 48 V extra power supply plugged to the terminal block
- Includes 2 fixing kits (DIN/wallmount)
- Supported temperature range in operation: -10°C to 60°C
- IP-30 Aluminum housing
- 75 W optional power supply, please order PN 314647