PLANET Industrial Switch- 4 x 10/100 + 2 x 100FX SC MM- 2 km

Réf. : 314706

This fiber media converter has 2 fiber ports and a 4-port embedded copper switch.
You can expand your network by cascading the converters up to 2 km.

The heavy-duty design makes this converter ideal for rough environments. It supports
extreme temperatures.

Product features:

- 4 x 100Mbps RJ-45 auto-MDIx ports
- 2 x 100FX duplex SC fiber ports
- Fiber optic signal: 100FX 1310nm
- Compatible with Multimode 50/125µm / 62.5/125µm (2km max) fiber
- RJ-45 copper transmission: 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber optics transmission: 200Mbps in Full-Duplex
- Protection index: IP30
- Supported temperature ranges: -40° to +75° / 5 à 90% humidity rate
- Two installation modes: DIN rail or wall-mounted
- Power supply: 2 x 48V with alarm output
- Protection: Ethernet 6KV DC / Power supply 6KV DC / Reversed polarity
- Dimensions : 135 x 97 x 32 mm - 442gr

Planet ISW-500T switch indust. 5P 10/100 compact -40/+75°

Réf. : 314505

Planet GSD-1008HP switch 10" 10P gigabit with 8 poe+ 120W &

Réf. : 411408

PLANET IGS-604HPT-RJ Industrial IP67 Giga Switch 6 P +4 PoE+

Réf. : 314864

The PLANET IGS-605HPT RJ is a layer 2 industrial switch with 6 Gigabit ports including 4 PoE+ ports.
All the RJ-45 connectors are sealed by a cable gland. The housing is fully weatherproof and the switch can be installed outdoors. The 4 x PoE+ can supply the power to wireless cameras and hot-
spots. The automatic Reset function activates an E-mail/ SNMN trap notification to the network administrator, in case of an undesirable event.
The two non-PoE ports are dedicated to Internet access, and the connection of an NVR or Wi-Fi controller.

PLANET IGS-4215-4P4T Industrial Switch 8 Giga Ports 4 PoE+

Réf. : 314846

The PLANET IGS-4215 4P4T2S is a layer 2 industrial switch with 8 Ethernet Gigabit ports including 4 PoE+ ports. In addition, the 2 dual-speed SFP ports provide fiber optic connection.
The switch can supply 30 W per port. In addition, two dual-speed SFP ports are available for fiber optic connection. The switch supports the usual layer 2 functions, including VLAN, IGMP, and Spanning Tree, as well as a smart PoE management function. If after 3 attempts, there is no answer, the switch automatically reboots the device and sends an E-mail notification to the network administrator. There is no need to send a technician to reboot the switch.
The programming schedule disconnects the power supply of idle devices connected to the switch. It is
easier to disable Wi-Fi hot-spots or telephones during the night, while keeping active the CCTV system.

IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Réf. : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314515

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

PLANET GSD-2022P Switch 18P Giga W/16 PoE++ 95W & 2 SFP

Réf. : 412222

Industrial 8-Port PoE+ Wall-mounted Gigabit switch

Réf. : 314818

Industrial 8-Port Wall-mounted Gigabit switch W/4 PoE+

Réf. : 314814

Industrial 8-Port Wall-mounted Gigabit switch

Réf. : 314811

Planet GSD-1002VHP sw 10P gigabit with 8P poe+ & lcd screen

Réf. : 410222

The PLANET GSD-1002VHP is a Gigabit Switch with 10 ports, including 8 PoE+ ports, which supply the power and the data over a single Ethernet cable, to PoE 802.3af/at-compliant devices.
The 2 non-PoE ports can build up a link to a NVR or Internet access.

In addition, the PoE+ PLANET GSD-1002VHP switch can supply up to 120W total PoE budget and is equipped with an LCD screen providing information on each PoE-compliant connected device.
You+ll be informed in real-time about the available power resource.
The switch was designed for small CCTV installations, including combinations of indoor/outdoor cameras, day/night vision and outdoor cameras as well.

The PLANET GSD-1002VHP supports two operating modes: VLAN isolation, where each port is isolated from another, and EXTENDED, where you can build up copper links up to 250m. For the latter, please use solid-wire category 6 cable and over, with RJ-45 field connectors.

Product features:

- 10 x 10/100/1000 RJ-45 ports including 8 PoE+
- Total PoE budget: 120 W
- LCD screen indicating the power consumption of each connected device and the available PoE resource on each port
- Supports VLAN isolation mode: each camera is isolated from the other ones, providing data protection and smoother video flows
- Supports EXTENDED mode: installation of IP cameras at up to 250 meters from the switch

Planet IGS-10020HPT L2 Industrial Switch 8 Giga PoE+& 2 SFP

Réf. : 314892

The PLANET IGS-10020 HPT was specifically designed for IP camera and wireless hot-spots installation, indoors and outdoors.
The two dual-speed fiber ports and layer 2 management functions provide smooth video and data flows.
The 8 PoE ports make it easier to deploy the system in spots where there is a lack of power outlets.
The switch supports Watchdog function, which automatically reboots idle PoE devices and facilitates the maintenance.

PLANET IGS-10020PT L2 Industrial Switch 8 Giga PoE & 2 SFP

Réf. : 314890

The PLANET IGS-10020TP was designed for IP and Hot-spot installation, indoor and outdoors.

The 2 dual-speed fiber ports and layer 2+ advanced management functions provide smooth video and data flows. The 8 PoE ports make it simple to install CCTV networks and wireless communication in places where there is a lack of power outlets.

The switch supports Watchdog function, which automatically reboots idle PoE devices, thus preventing
the hassle of sending a technician on site for maintenance each time a camera is down.

In addition, the programming schedule makes it possible to setup the powering on/off of connected PoE devices. For example, you can disable the wireless APs during the night, whilst keeping the IP camera activated, preventing any intruder to use your wireless network during the night without compromising your CCTV network.
The switch is also equipped with the usual layer 2+ features, such as VLAN, IGMP, Spanning Tree, QoS, and can be remotely accessed, in-band (web/SNMP) and out-band (RS-232 protocol)

PLANET IGS-510TF Switch Indust. 4p Gigabit & 1 SFP 100/1G

Réf. : 314841

PLANET FNSW 1600P PoE Switch with 16 x 10/100 Ports 125W

Réf. : 411621

The PLANET FNSW-1600P is a 16-port 10/100Mbps PoE Fast Ethernet Switch. It will power up to 16 x 802.3af PoE devices over RJ-45 cable. .
The switch transfers data and power through the same media.

Specifications:

- 16 x RJ45 10/100Mbps Auto-MDiX PoE Ports compliant with IEEE 802.3af/ Midspan standards (pin 4/5/7/8)
- Power output: 48V - 15,4W - 350mA
- Maximum output power delivered to the PD: 15,4W
- Maximum total power: 125W
- Rackmount: 19'' 1U
- Dimensions : 445 x 45 x 207 - 2.33kg
- Internal power supply: 100/240V 2A