PLANET RKE-10A Mounting Kit

Réf. : 410810

Fixing brackets for installation of a PLANET switch into a 10'' cabinet

Compatible with the following switches :

- FSD-804P : sku 410804
- GDS-800S : sku 411800
- GSD-804P : sku 411804
- GDS-1020S : sku 411812

PLANET POE-152 Gigabit PoE Injector Endspan 15.4W

Réf. : 410152

The PLANET POE-152 is an IEEE 802.3af Power over Ethernet Injector, which provides and inserts DC 48
volts over category 5 cable. The data and the power are sent over a single twisted pair cable to the
IEEE802.3af compliant connected device.
The PLANET PoE-152 provides Gigabit Ethernet connectivity. You can connect an IEEE802.3af-compliant end-node device, such as a wireless AP, IP telephone, IP camera with PoE port.

Key features :

- Compliant with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u/802.3ab 10/100/1000Base-T
- Provides DC 48V power over RJ-45 Ethernet cable to the connected device
- LED for power input indication
- Transmission distance: up to 100 meters
- Auto-detection of POE IEEE 802.3af equipment, protecting damage due to an incorrect installation
- Cable required: EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T

PLANET MGB-SX2 Multimode SFP Gigabit Fiber Transceiver - 2KM

Réf. : 411798

This hybrid transceiver module uses a long-distance signal over multimode fiber, less expensive than
single-mode. This feature can extend the communication distance to 2 kilometers, compared to the traditional 550-meter limitation.

Product features:

- Duplex fiber optic port with LC connectors
- Gigabit 100LX fiber link over 50/125µm multimode fiber optic cable
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Wavelength: FP 1310 nm
- Frequency: 1.25Gbps
- Power supply: +3.3 V
- Compatible with the MSA (Multi Source Agreement)
- Hot-swappable
- Compliant with SFP standard (Small Form Factor Pluggable 55.5 x 13.5 x 8.5mm)
- Class 1 Laser product, compliant with EN 6025-1 standard

PLANET MGB-GT SFP Gigabit Fiber Transceiver

Réf. : 411896

The PLANET MGB-GT fiber transceiver provides an additional copper port.

Product benefits:

- Compliant with an SFP Gigabit slot (3.3V)
- Output signal: 1000Base-T Full Duplex
- RJ-45 UTP category 5/6 cable over 100 meters
- Auto MDI-MDiX function

Caution:

Compatible with SFP Gigabit slots or SFP dual-speed slots, but not compatible with SFP 100FX slots.

No Auto MDI-MDiX on the RJ-45 side: Gigabit operation only, even if the module is set to a dual-speed SFP slot.

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Réf. : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

PLANET IP30 Outdoor PoE Splitter 12/24V -40/75°

Réf. : 314702

Industrial IEEE802.3at Gigabit High Power over Ethernet Splitter

- IP-30 metal case protection
- Din Rail and Wallmount design
- Supports 6000VDC EFT protection on the power line
- Supports 6000 VDC Ethernet ESD protection
- Complies with IEEE802.3at PoE powered devices
- Splits the 48~56 V DC power over RJ-45 Ethernet cable into DC 12V/24V output
- Auto detection of PoE IEEE802.3at equipment protects devices from being damaged by incorrect installation
- Adjustable output voltage options (12V/ 2A, 24V/ 1A) to fit various devices
- 2-Port RJ-45 interfaces:
1-port PoE Power + Data input
1-port Data output
- 2 DC out (4-pin terminal block)

PLANET MGB-TLX Mini GBIC LX Transceiver Module SM- 10 km

Réf. : 411795

The extension module is designed for Gigabit Ethernet switches with SFP/Mini-GBiC slots. The module can operate under extreme temperature conditions: -40° to +75°C
The Digital Diagnostic Monitoring function provides real-time information: I/O signal, laser temperature, etc...

Product features :

- Single-mode fiber LC connector
- Gigabit fiber connection up to 10km over single-mode 9/125µm fiber
- Compatible with the following standard : IEEE802.3z Gigabit
- Wavelength : PP 1310nm
- Frequency : 1,25Gbps
- Power supply : +3,3V
- Compatible MSA Multi Source Agreement
- Hot-swappable
- SFP (Small Form factor Pluggable) 55.5 x 13.5 x 8.5mm
- Laser Class 1 compatible with EN 60825-1 directive

The module is particularly resistant to extreme temperature spreads while keeping the performance. Recommended with industrial switches.

PLANET MGB-TSX Mini GBIC SX Fiber Transceiver Module MM 550m

Réf. : 411799

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard