BlueOptics kompatibler HPE Aruba J9151E SFP+ BO35J13610D

Réf. : 5414173

PLANET RKE-10A Mounting Kit

Réf. : 410810

Fixing brackets for installation of a PLANET switch into a 10'' cabinet

Compatible with the following switches :

- FSD-804P : sku 410804
- GDS-800S : sku 411800
- GSD-804P : sku 411804
- GDS-1020S : sku 411812

HPE Aruba J4858D kompatibler BlueOptics SFP BO05C856S5D

Réf. : 5416827

HPE Aruba J9150D kompatibler BlueOptics SFP+ BO35J856S3D

Réf. : 5416803

Cisco SFP-10G-SR kompatibler BlueOptics SFP+ BO35J856S3D

Réf. : 5424341

HPE Aruba J4859D kompatibler BlueOptics SFP BO05C13610D

Réf. : 5416728

HPE Aruba J9151D kompatibler BlueOptics SFP+ BO35J13610D

Réf. : 5416810

SFP 1000SX Compatible Aruba HP J4858D

Réf. : 311761

Cisco GLC-LH-SMD kompatibler BlueOptics SFP BO05C13610D

Réf. : 5429070

Cisco GLC-SX-MMD kompatibler BlueOptics SFP BO05C856S5D

Réf. : 5424471

D-Link DEM-431XT kompatibler BlueOptics SFP+ BO35J856S3D

Réf. : 5425935

Cisco SFP-10G-LR kompatibler BlueOptics SFP+ BO35J13610D

Réf. : 5424372

Dell 330-2405 kompatibler BlueOptics SFP+ BO35J856S3D

Réf. : 5425829

D-Link DEM-432XT kompatibler BlueOptics SFP+ BO35J13610D

Réf. : 5427267

D-Link DEM-310GT kompatibler BlueOptics SFP BO05C13610D

Réf. : 5429186

Microsens MS400089, GBEMedienkonverter mit Bridging-Funktion und PoE, optional PoE+

Réf. : 94900039

DAC SFP+ 10G 5m compatible Cisco SMB/Catalyst

Réf. : 311777

PLANET POE-152 Gigabit PoE Injector Endspan 15.4W

Réf. : 410152

The PLANET POE-152 is an IEEE 802.3af Power over Ethernet Injector, which provides and inserts DC 48
volts over category 5 cable. The data and the power are sent over a single twisted pair cable to the
IEEE802.3af compliant connected device.
The PLANET PoE-152 provides Gigabit Ethernet connectivity. You can connect an IEEE802.3af-compliant end-node device, such as a wireless AP, IP telephone, IP camera with PoE port.

Key features :

- Compliant with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u/802.3ab 10/100/1000Base-T
- Provides DC 48V power over RJ-45 Ethernet cable to the connected device
- LED for power input indication
- Transmission distance: up to 100 meters
- Auto-detection of POE IEEE 802.3af equipment, protecting damage due to an incorrect installation
- Cable required: EIA568, category 5, 5e or 6 ,2/4-pair cables for 10Base-T or 100Base-TX and 1000Base-T

PLANET MGB-SX2 Multimode SFP Gigabit Fiber Transceiver - 2KM

Réf. : 411798

This hybrid transceiver module uses a long-distance signal over multimode fiber, less expensive than
single-mode. This feature can extend the communication distance to 2 kilometers, compared to the traditional 550-meter limitation.

Product features:

- Duplex fiber optic port with LC connectors
- Gigabit 100LX fiber link over 50/125µm multimode fiber optic cable
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Wavelength: FP 1310 nm
- Frequency: 1.25Gbps
- Power supply: +3.3 V
- Compatible with the MSA (Multi Source Agreement)
- Hot-swappable
- Compliant with SFP standard (Small Form Factor Pluggable 55.5 x 13.5 x 8.5mm)
- Class 1 Laser product, compliant with EN 6025-1 standard

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

SFP 1000SX compatible Cisco SMB Series

Réf. : 311773

PLANET MGB-GT SFP Gigabit Fiber Transceiver

Réf. : 411896

The PLANET MGB-GT fiber transceiver provides an additional copper port.

Product benefits:

- Compliant with an SFP Gigabit slot (3.3V)
- Output signal: 1000Base-T Full Duplex
- RJ-45 UTP category 5/6 cable over 100 meters
- Auto MDI-MDiX function

Caution:

Compatible with SFP Gigabit slots or SFP dual-speed slots, but not compatible with SFP 100FX slots.

No Auto MDI-MDiX on the RJ-45 side: Gigabit operation only, even if the module is set to a dual-speed SFP slot.

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Réf. : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

DAC SFP+ 10G 1m compatible Cisco SMB/Catalyst

Réf. : 311778

SFP 1000SX compatible Cisco Catalyst

Réf. : 311771