Phone number Fröhlich

68 product(s) matching your search

 
Clear selection
Select 5 products at the most
List
Product designation Up Down Brand Up Down Stock/ Avail. Up Down
View more details PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP Dexlan

View more details PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP Exertis Connect

View more details PLANET POE 1200G 12 Port PoE Injector Hub Planet

View more details PLANET MFB-F20 SFP 100 FX SFP Transceiver Single Mode 20 km Planet

View more details PLANET FT-802 TX to FX Bridge Media Converter- 2km

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Réf. : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection


Be the first to write a review

Planet

View more details Planet ISW-500T switch indust. 5P 10/100 compact -40/+75° Planet

View more details Planet GSD-1002VHP sw 10P gigabit with 8P poe+ & lcd screen Planet

View more details PLANET GT-802 Gigabit 1000SX Media Converter Planet

View more details PLANET GT-805A Gigabit SFP Media Converter Planet

View more details PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP Planet

View more details PLANET GSD-908HP Gigabit PoE Switch 120W-8 Ports+ NVR Giga

PLANET GSD-908HP Gigabit PoE Switch 120W-8 Ports+ NVR Giga

Réf. : 411908

The GSD-908HP is equipped with 8 x 10/100/1000Mbps 802.3at/af PoE+ ports and 1 Gigabit port, for a total budget of 120 Watts.
The 8 IEEE802.3at PoE+ ports supply the power to IEEE802.3at/af - compliant devices.
It is the ideal solution for video surveillance SOHO installations. The Gigabit Uplink port is dedicated to NVR connection for local data storage and backup.
The GSD-908HP has a metal housing, suitable for domestic and professional environments. The switch has magnetic pads, an easy way to fix it on a metallic vertical surface.
The anchor is handy if you want to protect your device with a locking system.

Specifications:

- Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX, IEEE 802.3ab, 1000Base-T standards
- 9 x 10/100/1000Mbps Gigabit Ethernet ports
- 8 Ports supply 51V DC power to the connected PoE Powered Device (1-8)
- Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
- Up to 8 IEEE 802.3af devices can be powered
- Supports PoE Power, up to 15.4 watts for each PoE port
- Up to 4 IEEE 802.3at devices can be powered
- Supports PoE Power, up to 30 watts for each PoE port
- 120-watt PoE budget
- Auto detection of the connected powered device (PD)
- Anti-interference protection
- Remote power feeding up to 100m
- Supports Auto negotiation and Auto MDI/MDI-X functions
- Store-and-Forward architecture
- Supports IEEE 802.3x flow control for Full Duplex operation and backpressure for Half Duplex operation
- Address look-up engine, supporting 4K absolute MAC addresses
- 192 KB packet buffer
- Supports 9K Jumbo frames at 1000Mbps speed duplex mode
- Automatic address learning and address aging
- Supports CSMA/CD protocol
- LED indicators for Power/ PoE status/ Speed/ Link & Activity on each port
- External power supply: 51V 2.5A
- Fanless silent device
- Dimensions : 103 x 235 x 27 mm - 630gr



Be the first to write a review

Planet

New Product
View more details PLANET POE-164 30W at High Power over Ethernet Injector
Planet

New Product
View more details PLANET POE 173 Ultra High Power Injector PoE++60W
Planet

View more details PLANET POE 1200G 12 Port PoE Injector Hub Planet

View more details PLANET MC-1500  19" Media Converter Chassis- 15 Slots

PLANET MC-1500 19" Media Converter Chassis- 15 Slots

Réf. : 411400

Fiber-optic wiring/ Media conversion center
With up to 15-bay, this high-density media chassis can simply be a conversion center of your fiber-optic network, or a network with the demand of multiple media interfaces, in a cost-effective way.
Providing more capacity to the converters in one chassis, the PLANET MC-1500 provides 15-slot in the
19''-rack saving more spaces for fiber-optic wiring yet ease the maintenance of media conversion.
The PLANET MC-1500, media chassis allows the connectivity of up to fifteen PLANET Ethernet/ Fast Ethernet Gigabit Ethernet Converter in one chassis.
Two fans with LED indicators for the system cooling and keep you informed in the system and FAN status.
Independent power supply in each bay of the MC 1500, you can freely install the converters without interrupting the rest of the networks. Moreover, each bay of the media center can deploy to PLANET's
converter family like Ethernet, Fast Ethernet twisted pair to Fiber-optic conversion, Gigabit SX to LX conversion, etc.

Specifications :
- Slot : 15 open slot; 27 x 95 x 71 mm (W x D x H)
- Dimension : (W x H x D) 440 mm x 103 mm x 180 mm, 2.4U height
- Power Requirement : 100-240V AC, 1.8A, 50/60Hz
- Power output : +5V DC per slot, 1 A minimum
- DC Output : +5VDC (+/-1%) per slot
- LED indicators : 3, Power, Fan A, Fan B (On: operating; Off: device or fan fail)
- Environment Temperature : 0~50 Degree C (operating); -20~70 Degree C (storage) Humidity: 0~90% (non-condensing)

Be the first to write a review

Planet

New Product
View more details PLANET FNSW 1600P PoE Switch with 16 x 10/100 Ports 125W
Planet

New Product
View more details PLANET FNSW 1600P PoE Switch with 16 x 10/100 Ports 125W
Planet

New Product
View more details Web Manageable Switch 1000Base-TX to 1000Base-SX/LX (SFP)

Web Manageable Switch 1000Base-TX to 1000Base-SX/LX (SFP)

Réf. : 411915

The PLANET GT-905A Gigabit Ethernet media converter has an embedded Web Smart Controller interface for the control of the data flow, QoS, the bandwidth dispatching and the data transfer speed. The statistic functions of the Web Smart Controller interface provide remote analysis and count the packet flow of the current Ethernet link.
The PLANET GT-905A supports LLR function and Loop Back function, which alarm the administrator prior
to visual inspection.
The SFP fiber connector supports 1000Base-SX multimode and 1000Base-LX single mode Duplex or WDM multiplexed transceivers.
The RJ-45 10/100/1000Mbps copper port supports auto-negotiation and auto MDI/MDI-X functions.
This converter can be used as a stand-alone unit or as a slide-in module to the PLANET MC-700/ MC-
1500 chassis.

Specifications :
- Supports conversion between 10/100/1000Base-TX and 1000Base-SX/LX/BX networks
- Compliant with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX standards.
- Supports auto-negotiation on RJ45 10/100/1000Base-T ports
- The RJ-45 port supports MDI/MDI-X function
- Compact size, fits PLANET MC Media chassis (MC-700 / MC-1500)
- Supports web-based interface for remote management by web browser
- Supports Planet Discovery utility
- Layer 2 management functions
- Supports IEEE 802.3x flow control
- Store-and-Forward architecture
- VLAN802.1Q VLAN tag
- Supports two levels of priority line
- Supports QoS 802.1p
- Supports input/ output bandwidth control
- Supports Broadcast Storm Control
- Supports Ethernet statistic functions on copper and fiber optic interfaces
- Supports LBT and LLR functions
- SNMP trap
- LED indicators for network diagnostic
- RESET button on front panel
- Supports single mode or multimode transceiver on fiber interface
- Power supply : 5V/ 2A (included) / power consumption 5.5W
- Dimensions : 93 x 70 x 26 mm




Be the first to write a review

Planet

New Product
View more details PLANET GSD-2022P Switch 18P Giga W/16 PoE++ 95W & 2 SFP
Planet

View more details PLANET IGS-510TF Switch Indust. 4p Gigabit & 1 SFP 100/1G Planet

View more details Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter Planet

View more details PoE TESTER UP TO PoE++ Planet

View more details Planet FGSD-1022VHP 8P PoE+Switch 120W+ LCD screen +2G +2SFP

Planet FGSD-1022VHP 8P PoE+Switch 120W+ LCD screen +2G +2SFP

Réf. : 411022

The PLANET FGSD-1022VHP is a PoE+ switch equipped with 8 RJ-45 PoE+ ports and 2 Gigabit combo ports.
The 8 PoE+ ports supply the power to PoE 802.3af/at-compliant devices.
The 2 RJ-45 Gigabit ports are combo ports, meaning they can be operated either with a copper connection or with a fiber connection. You can insert SFP modules and build up a long-distance connection (NVR, Internet access)
The FGSD-1022VHP has a 120W PoE power output budget and the LCD screen can give you real-time information on the status of each connected device.
The switch is well adapted to small CCTV installations, for example a combination of indoor cameras with or without day/night vision or PTZ outdoor cameras with heated housings, which demand more resources.
Aside from the PoE+ functions, the PLANET FGSD-1022VHP has a micro switch. You can select the ''VLAN mode'' and isolate each port of the connected cameras, to improve the image flows transferred to the recorders, or select the ''Extended mode'', if you need to build up an up to 250-m connection over copper Ethernet cable. For this latter mode, we recommend that you use solid-wire category 6 cable with RJ-45 field connectors.

Product benefits:

- 8 x 10/100 PoE+ 802.3af/at ports supplying each 30.8W
- 2 x 10/100/1000 SFP/copper combo ports
- Total PoE budget: 120 W
- LCD screen providing the status of each PoE+ port including the power consumption and remaining power.
- Two operating modes: VLAN and Extended
VLAN mode: isolation of each port for better security and flow quality
Extended mode: long-distance connection up to 250 m

Be the first to write a review

Planet

View more details Planet GS-4210-8P2S Gigabit Switch PoE+120W & 2 sfp 100FX/1G Planet

View more details Planet FGSD-1022VHP 16P PoE+Switch 300W LCD screen +2G +2SFP

Planet FGSD-1022VHP 16P PoE+Switch 300W LCD screen +2G +2SFP

Réf. : 411822

The PLANET FGSW-1822VHP is a PoE+ switch equipped with 16 RJ-45 PoE+ ports and 2 Gigabit combo ports.
The 8 PoE+ ports supply the power to PoE 802.3af/at-compliant devices.
The 2 RJ-45 Gigabit ports are combo ports, meaning they can be operated either with a copper connection or with a fiber connection. You can insert SFP modules and build up a long-distance connection (NVR, Internet access)
The FGSW-1822VHP has a 300 W PoE power output budget and the LCD screen can give you real-time information on the status of each connected device.
The switch is well adapted to small CCTV installations, for example a combination of indoor cameras with or without day/night vision or PTZ outdoor cameras with heated housings, which demand more resources.
Aside from the PoE+ functions, the PLANET FGSW-1822VHP has a micro switch. You can select the ''VLAN mode'' and isolate each port of the connected cameras, to improve the image flows transferred to the recorders, or select the ''Extended mode'', if you need to build up an up to 250-m connection over copper Ethernet cable. For this latter mode, we recommend that you use solid-wire category 6 cable with RJ-45 field connectors.

Product benefits:

- 16 x 10/100 PoE+ 802.3af/at ports supplying each 30.8W
- 2 x 10/100/1000 SFP/copper combo ports
- Total PoE budget: 300 W
- LCD screen providing the status of each PoE+ port including the power consumption and remaining power.
- Two operating modes: VLAN and Extended
VLAN mode: isolation of each port for better security and flow quality
Extended mode: long-distance connection up to 250 m

Be the first to write a review

Planet

NEWSLETTER: Abonnieren Sie unseren kostenlosen Newsletter (B2B) und erhalten Sie exklusive Angebote und Informationen: