PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311760

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 311793

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g

PLANET POE 1200G 12 Port PoE Injector Hub

Réf. : 411203

The PLANET PoE-1200G manageable hub is a 12-port injector, which can supply the power to 12 PoE802.3af-compatible devices over RJ-45 cables.

Product features:

- 12 x RJ-45 10/100/1000 Mbps input ports
- 12 x RJ-45 10/100/1000 Mbps PoE output ports
- 1 x RJ-45 port dedicated to web-based management
- Signal strength: 48 V-15.4 W- 350mA
- Maximum PoE budget: 15.4 W
- Total output power: 200 W
- Web-based / RS-232 configuration
- 19'' Rackmount/1U
- Internal power supply: 100-240 V

PLANET MFB-F20 SFP 100 FX SFP Transceiver Single Mode 20 km

Réf. : 411695

This series of SFP modules was designed for single-mode fiber links. The modules are hot-swappable, according to the Multisource Agreement (MSA) standards, they are hot-swappable
The modules operate at 1310nm and can transmit to 20 km over 9/125µm single-mode fiber.

Product features:

- Signal: 100FX single-mode/ 1310nm @ 20 km
- Supported temperature in operation: 0-50°C
- Compatible with 9/125µm fiber

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Réf. : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

Planet ISW-500T switch indust. 5P 10/100 compact -40/+75°

Réf. : 314505

Planet GSD-1002VHP sw 10P gigabit with 8P poe+ & lcd screen

Réf. : 410222

The PLANET GSD-1002VHP is a Gigabit Switch with 10 ports, including 8 PoE+ ports, which supply the power and the data over a single Ethernet cable, to PoE 802.3af/at-compliant devices.
The 2 non-PoE ports can build up a link to a NVR or Internet access.

In addition, the PoE+ PLANET GSD-1002VHP switch can supply up to 120W total PoE budget and is equipped with an LCD screen providing information on each PoE-compliant connected device.
You+ll be informed in real-time about the available power resource.
The switch was designed for small CCTV installations, including combinations of indoor/outdoor cameras, day/night vision and outdoor cameras as well.

The PLANET GSD-1002VHP supports two operating modes: VLAN isolation, where each port is isolated from another, and EXTENDED, where you can build up copper links up to 250m. For the latter, please use solid-wire category 6 cable and over, with RJ-45 field connectors.

Product features:

- 10 x 10/100/1000 RJ-45 ports including 8 PoE+
- Total PoE budget: 120 W
- LCD screen indicating the power consumption of each connected device and the available PoE resource on each port
- Supports VLAN isolation mode: each camera is isolated from the other ones, providing data protection and smoother video flows
- Supports EXTENDED mode: installation of IP cameras at up to 250 meters from the switch

PLANET GT-802 Gigabit 1000SX Media Converter

Réf. : 411802

Key features:

- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
- TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
- 1000Base-SX: 50/125µm or 62.5/125µm multi-mode fiber cable, up to 220/550m (GT-802).
- Layer 2 key Feature
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminates the loss of packets
- Supports auto MDI/MDI-X function
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
- Media conversion between 10/100/1000Base-T and 1000Base-SX/LX.
- Wallmounting design
- LED indicators for easy network diagnostic
- LFP function available by DIP Switch
- Supports jumbo frames up to 9k
- Compact size, easy installation